The branch of ARICO Technology Co.Ltd.
联通号码
电信号码
特价号码
工程业绩

Name:
  • Human-Machine Interface for TC5000
Features:
  • 1、10.4”TFT touch panel LCD
  • 2、System memory 128MBSDRAM
  • 3、RS485 interface
  • 4、Fanless and ultra-low power consumption
  • 5、ROHS compliance
Specifications:
  • 1. LCD type 10.4” color TFT
  • 2. Resolution/color 800×600@262K
  • 3. Pixel Pitch(mm) 0.264×0.264(mm)
  • 4. Viewing angle 35° (up) / 60°(other)
  • 5. Backlight MTBF=20,000 hrs
  • 6. Controller RS232(COM4)
  • 7. Lift time=35 million touches
  • 8. Serial ports RS232/485/422
  • 9. Keyboard/mouse PS2
  • 10. Dimensions(mm) 342×265×93
  • 11. Weight=3200g
  • 12. Power supply 100~240VAC / 24VDC
  • 13. Operation temp.0~45℃
  • 14. Relative Humidity 10~85%@40℃

15. Protection IP65

Name:
  • TC5000 Multi-Cavity Hot Runner Controllers
Features:
  • 1、 HMI is available to control and analysis multi-zone temperature
  • 2、 One cabinet control 64 zones temperature
  • 3、 Multi-zones control and expand via RS485
  • 4、 FUZZY PID control temperature precisely
  • 5、 Multi-function for break and reverse detections
  • 6、 Easy maintenance and repair.
  • 7、 Multi-language interface
Specifications:
  • 1. Measure accuracy:0.25%FS(25℃)
  • 2. Control accuracy:0.25%FS(25℃)
  • 3. Sampling time:100msec
  • 4. Control algorithm:FUZZY PID
  • 5. Output wattage:3600W/15A/240VAC per point
  • 6. Power consumption:6.6W per module
  • 7. Main input:thermocouple K、J type
  • 8. Input impedance:2MΩ
  • 9. Power supply:230VAC±15%
  • 10. Power frequency:50/60Hz
  • 11. Temperature range:0~750℃/32~1400℉(K type) 0~600℃/32~1100℉(J type)
  • 12. Work temperature:0~50℃/32~122℉
  • 13. Storage temperature:-20~70℃
  • 14. Work humidity10%~80%RH(non-condensing)
  • 15. Size:42×56×111cm

Name:
  • Multi-Cavity Hot Runner Controller Module
Features:
  • 1. Single module controlling two temperature set-points
  • 2. Current indication
  • 3. RS485 communication interface
  • 4. Brand new Fuzzy PID temperature control
  • 5. Fuse break indicator
  • 6. Thermocouple break & inversion detect
  • 7. Heater break indicator
  • 8. Auto/Manual control switch
  • 9. Temperature range: 0~600˚C or 32~1100˚F(J type)
  • 0~750˚C or 32~1400˚F(K type)
  • 10. Involve all TC5E function
Specifications:
  • 1. Power supply:230VAC±15%
  • 2. Power frequency:50/60Hz
  • 3. Power consumption:6.6W per module
  • 4. Temperature range:0~750℃/32~1400℉(K type)
  • 0~600℃/32~1100℉(J type)
  • 5. Input impedance:2MΩ
  • 6. Output wattage:3600W/15A/240VAC per point
  • 7. Storage temperature:-20~70℃
  • 8. Measure accuracy:0.25%FS(25℃)
  • 9. Control accuracy:0.25%FS(25℃)
  • 10. Main input:thermocouple K、J type
  • 11. Work temperature:0~50℃/32~122℉
  • 12. Work humidity:10%~80%RH(non-condensing)

Name:
  • Multi-Cavity Hot Runner Controllers-6Zone
Features:
  • 1. Single module controlling two temperature set-points
  • 2. Current indication
  • 3. RS485 communication interface
  • 4. Brand new Fuzzy PID temperature control
  • 5. Fuse break indicator
  • 6. Thermocouple break & inversion detect
  • 7. Heater break indicator
  • 8. Auto/Manual control switch
  • 9. Temperature range: 0~600˚C or 32~1100˚F(J type)
  • 0~750˚C or 32~1400˚F(K type)
  • 10. Involve all TC5E function
Specifications:
  • 1. Power supply:230VAC±15%
  • 2. Power frequency:50/60Hz
  • 3. Power consumption:6.6W per module
  • 4. Temperature range:0~750℃/32~1400℉(K type)
  • 0~600℃/32~1100℉(J type)
  • 5. Input impedance:2MΩ
  • 6. Output wattage:3600W/15A/240VAC per point
  • 7. Storage temperature:-20~70℃
  • 8. Measure accuracy:0.25%FS(25℃)
  • 9. Control accuracy:0.25%FS(25℃)
  • 10. Main input:thermocouple K、J type
  • 11. Work temperature:0~50℃/32~122℉
12. Work humidity:10%~80%RH(non-condensing)

Name:
  • Multi-Cavity Hot Runner Controllers-4Zone
Features:
  • 1. Single module controlling two temperature set-points
  • 2. Current indication
  • 3. RS485 communication interface
  • 4. Brand new Fuzzy PID temperature control
  • 5. Fuse break indicator
  • 6. Thermocouple break & inversion detect
  • 7. Heater break indicator
  • 8. Auto/Manual control switch
9. Temperature range:
  • 0~600˚C or 32~1100˚F(J type)
  • 0~750˚C or 32~1400˚F(K type)
  • 10. Involve all TC5E function
Specifications:
  • 1. Power supply:230VAC±15%
  • 2. Power frequency:50/60Hz
  • 3. Power consumption:6.6W per module
  • 4. Temperature range:0~750℃/32~1400℉(K type)
  • 0~600℃/32~1100℉(J type)
  • 5. Input impedance:2MΩ
  • 6. Output wattage:3600W/15A/240VAC per point
7. Storage temperature:
  • -20~70℃
  • 8. Measure accuracy:0.25%FS(25℃)
  • 9. Control accuracy:0.25%FS(25℃)
  • 10. Main input:thermocouple K、J type
  • 11. Work temperature:0~50℃/32~122℉
12. Work humidity:10%~80%RH(non-condensing)

Name:
  • Hot Runner Controller Module
Features:
  • 1. Dual SV/PV temperature control
  • 2. Soft start function
  • 3. Dual lines LED display
  • 4. Temperature unit display
  • 5. Auto/Manual control mode
  • 6. PID auto-tunning control.
  • 7. Thermocouple J or K type selectable by panel
  • 8. Two types of temperature scale selectable by panel
  • 9. Six alarm modes selectable.
  • 10. Double trigger modes(phase angle , zero cross)selectable by panel
  • 11. Fuse break indicator
  • 12. Power frequency auto-detect.
  • 13. thermocouple break and inverse detect.
Specifications:
  • 1. Power supply:220VAC±10%,50/60Hz
  • 2. Power consumption:2.5W/per module
  • 3. Temperature range:0~850℃/32~999℉
  • 4. Input impedance:2MΩ
  • 5. Output wattage:3600W,15A/240VAC
  • 6. Storage temperature:-20~70℃
  • 7. Measure accuracy:0.25%FS(25℃)
  • 8. Control accuracy:0.25%FS(25℃)
  • 9. Main input:thermocouple K、J type
  • 10. Work temperature:0~50℃/32~122℉
  • 11. Work humidity:10%~80%RH(non-condensing)

Name:
  • Hot Runner Controller-12 Zone
Features:
  • 1. Dual SV/PV temperature control
  • 2. Soft start function
  • 3. Dual lines LED display
  • 4. Temperature unit display
  • 5. Auto/Manual control mode
  • 6. PID auto-tunning control.
  • 7. Thermocouple J or K type selectable by panel
  • 8. Two types of temperature scale selectable by panel
  • 9. Six alarm modes selectable.
  • 10. Double trigger modes(phase angle , zero cross)selectable by panel
  • 11. Fuse break indicator
  • 12. Power frequency auto-detect.
  • 13. thermocouple break and inverse detect.
Specifications:
  • 1. Power supply:220VAC±10%,50/60Hz
  • 2. Power consumption:2.5W/per module
  • 3. Temperature range:0~850℃/32~999℉
  • 4. Input impedance:2MΩ
  • 5. Output wattage:3600W,15A/240VAC
  • 6. Storage temperature:-20~70℃
  • 7. Measure accuracy:0.25%FS(25℃)
8. Control accuracy:
  • 0.25%FS(25℃)
  • 9. Main input:thermocouple K、J type
  • 10. Work temperature:0~50℃/32~122℉
  • 11. Work humidity:10%~80%RH(non-condensing)
Order Code:
  • TC5E-a-b-c-d-e-f
  • a:ZONE
       01:1 zone
       02:2 zones
       04:4 zones
       06:6 zones
       08:8 zones
       12:12 zones
  • b:Housing and Hood
       SHB:housing is single hook hood is single button
       DHB:housing is dual hook hood is dual button
       DBH:housing is dual button hood is dual hook
  • c:Power Wiring
       A0:A type 3-phase 4-wire 200~242VAC
       B0:B type 3-phase5-wire 380~415VAC
       A1:A type 3-phase 4-wire 200~242VAC
       B1:B type 3-phase5-wire 380~415VAC
  • d:Power Cable Length
       03:3m (standard)
  • e:O/P Connector Wiring
       A:A type
       B:B type
       C:C type
f:Cable Wiring
           00:without connection cable
           03:3m (standard)

Name:
  • Hot Runner Controller-8 Zone
Features:
  • 1. Dual SV/PV temperature control
  • 2. Soft start function
  • 3. Dual lines LED display
  • 4. Temperature unit display
  • 5. Auto/Manual control mode
  • 6. PID auto-tunning control.
  • 7. Thermocouple J or K type selectable by panel
  • 8. Two types of temperature scale selectable by panel
  • 9. Six alarm modes selectable.
  • 10. Double trigger modes(phase angle , zero cross)selectable by panel
  • 11. Fuse break indicator
  • 12. Power frequency auto-detect.
  • 13. thermocouple break and inverse detect.
Specifications:
  • 1. Power supply:220VAC±10%,50/60Hz
  • 2. Power consumption:2.5W/per module
  • 3. Temperature range:0~850℃/32~999℉
  • 4. Input impedance:2MΩ
  • 5. Output wattage:3600W,15A/240VAC
  • 6. Storage temperature:-20~70℃
  • 7. Measure accuracy:0.25%FS(25℃)
  • 8. Control accuracy:0.25%FS(25℃)
  • 9. Main input:thermocouple K、J type
  • 10. Work temperature:0~50℃/32~122℉
  • 11. Work humidity
  • 10%~80%RH(non-condensing)
Order Code:
  • TC5E-a-b-c-d-e-f
  • a:ZONE
       01:1 zone
       02:2 zones
       04:4 zones
       06:6 zones
       08:8 zones
       12:12 zones

  •    A1:A type 3-phase 4-wire 200~242VAC
       B1:B type 3-phase5-wire 380~415VAC
  • d:Power Cable Length
       03:3m (standard)
  • e:O/P Connector Wiring
       A:A type
       B:B type
       C:C type
  • f:Cable Wiring
       00:without connection cable
       03:3m (standard)
  • b:Housing and Hood
       SHB:housing is single hook hood is single button
       DHB:housing is dual hook hood is dual button
       DBH:housing is dual button hood is dual hook
  • c:Power Wiring
       A0:A type 3-phase 4-wire 200~242VAC
       B0:B type 3-phase5-wire 380~415VAC

Name:
  • Hot Runner Controller-1Zone
Features:
  • 1. Dual SV/PV temperature control
  • 2. Soft start function
  • 3. Dual lines LED display
  • 4. Temperature unit display
  • 5. Auto/Manual control mode
  • 6. PID auto-tunning control.
  • 7. Thermocouple J or K type selectable by panel
  • 8. Two types of temperature scale selectable by panel
  • 9. Six alarm modes selectable.
  • 10. Double trigger modes(phase angle , zero cross)selectable by panel
  • 11. Fuse break indicator
  • 12. Power frequency auto-detect.
  • 13. thermocouple break and inverse detect.
Specifications:
  • 1. Power supply:220VAC±10%,50/60Hz
  • 2. Power consumption:2.5W/per module
  • 3. Temperature range:0~850℃/32~999℉
  • 4. Input impedance:2MΩ
  • 5. Output wattage:3600W,15A/240VAC
  • 6. Storage temperature:-20~70℃
  • 7. Measure accuracy0.25%FS(25℃)
  • 8. Control accuracy:0.25%FS(25℃)
  • 9. Main input:thermocouple K、J type
  • 10. Work temperature:0~50℃/32~122℉
  • 11. Work humidity:10%~80%RH(non-condensing)
Order Code:
  • TC5E-a-b-c-d-e-f
  • a:ZONE
       01:1 zone
       02:2 zones
       04:4 zones
       06:6 zones
       08:8 zones
       12:12 zones
  • b:Housing and Hood
       SHB:housing is single hook hood is single button
       DHB:housing is dual hook hood is dual button
       DBH:housing is dual button hood is dual hook
  • c:Power Wiring
       A0:A type 3-phase 4-wire 200~242VAC
       B0:B type 3-phase5-wire 380~415VAC
       A1:A type 3-phase 4-wire 200~242VAC
       B1:B type 3-phase5-wire 380~415VAC
  • d:Power Cable Length
       03:3m (standard)
  • e:O/P Connector Wiring
       A:A type
       B:B type
  •   C:C type
  •  f:Cable Wiring
       00:without connection cable
       03:3m (standard)

  • Hot Runner Controller-6 Zone
Features:
  • 1. Dual SV/PV temperature control
  • 2. Soft start function
  • 3. Dual lines LED display
  • 4. Temperature unit display
  • 5. Auto/Manual control mode
  • 6. PID auto-tunning control.
  • 7. Thermocouple J or K type selectable by panel
  • 8. Two types of temperature scale selectable by panel
  • 9. Six alarm modes selectable.
  • 10. Double trigger modes(phase angle , zero cross)selectable by panel
  • 11. Fuse break indicator
  • 12. Power frequency auto-detect.
  • 13. thermocouple break and inverse detect.
Specifications:
  • 1. Power supply:220VAC±10%,50/60Hz
  • 2. Power consumption:2.5W/per module
  • 3. Temperature range:0~850℃/32~999℉
  • 4. Input impedance:2MΩ
  • 5. Output wattage:3600W,15A/240VAC
  • 6. Storage temperature:-20~70℃
  • 7. Measure accuracy:0.25%FS(25℃)
  • 8. Control accuracy:0.25%FS(25℃)
  • 9. Main input:thermocouple K、J type
  • 10. Work temperature:0~50℃/32~122℉
  • 11. Work humidity:10%~80%RH(non-condensing)
Order Code:
  • TC5E-a-b-c-d-e-f
  • a:ZONE
       01:1 zone
       02:2 zones
       04:4 zones
       06:6 zones
       08:8 zones
       12:12 zones
  • b:Housing and Hood
       SHB:housing is single hook hood is single button
       DHB:housing is dual hook hood is dual button
       DBH:housing is dual button hood is dual hook
  • c:Power Wiring
       A0:A type 3-phase 4-wire 200~242VAC
       B0:B type 3-phase5-wire 380~415VAC
       A1:A type 3-phase 4-wire 200~242VAC
       B1:B type 3-phase5-wire 380~415VAC
  • d:Power Cable Length
       03:3m (standard)
  • e:O/P Connector Wiring
       A:A type
       B:B type
       C:C type
  • f:Cable Wiring
       00:without connection cable
       03:3m (standard)

  • Name:
Hot Runner Controller-2 Zone
Features:
  • 1. Dual SV/PV temperature control
  • 2. Soft start function
  • 3. Dual lines LED display
  • 4. Temperature unit display
  • 5. Auto/Manual control mode
  • 6. PID auto-tunning control.
  • 7. Thermocouple J or K type selectable by panel
  • 8. Two types of temperature scale selectable by panel
  • 9. Six alarm modes selectable.
  • 10. Double trigger modes(phase angle , zero cross)selectable by panel
  • 11. Fuse break indicator
  • 12. Power frequency auto-detect.
  • 13. thermocouple break and inverse detect.
Specifications:
  • 1. Power supply:220VAC±10%,50/60Hz
  • 2. Power consumption:2.5W/per module
  • 3. Temperature range:0~850℃/32~999℉
  • 4. Input impedance:2MΩ
  • 5. Output wattage:3600W,15A/240VAC
  • 6. Storage temperature:-20~70℃
  • 7. Measure accuracy:0.25%FS(25℃)
  • 8. Control accuracy:
  • 0.25%FS(25℃)
  • 9. Main input:thermocouple K、J type
  • 10. Work temperature:0~50℃/32~122℉
  • 11. Work humidity:10%~80%RH(non-condensing)
Order Code:
  • TC5E-a-b-c-d-e-f
  • a:ZONE
       01:1 zone
       02:2 zones
       04:4 zones
       06:6 zones
       08:8 zones
       12:12 zones
  • b:Housing and Hood
       SHB:housing is single hook hood is single button
       DHB:housing is dual hookhood is dual button
       DBH:housing is dual button hood is dual hook
  • c:Power Wiring
       A0:A type 3-phase 4-wire 200~242VAC
       B0:B type 3-phase5-wire 380~415VAC
       A1:A type 3-phase 4-wire 200~242VAC
       B1:B type 3-phase5-wire 380~415VAC
  • d:Power Cable Length
       03:3m (standard)
  • e:O/P Connector Wiring
       A:A type
       B:B type
       C:C type
  • f:Cable Wiring
       00:without connection cable
       03:3m (standard)

Name:
  • Hot Runner Controller-4 Zone
Features:
  • 1. Dual SV/PV temperature control
  • 2. Soft start function
  • 3. Dual lines LED display
  • 4. Temperature unit display
  • 5. Auto/Manual control mode
  • 6. PID auto-tunning control.
  • 7. Thermocouple J or K type selectable by panel
  • 8. Two types of temperature scale selectable by panel
  • 9. Six alarm modes selectable.
  • 10. Double trigger modes(phase angle , zero cross)selectable by panel
  • 11. Fuse break indicator
  • 12. Power frequency auto-detect.
  • 13. thermocouple break and inverse detect.
Specifications:
  • 1. Power supply:220VAC±10%,50/60Hz
  • 2. Power consumption:2.5W/per module
  • 3. Temperature range:0~850℃/32~999℉
  • 4. Input impedance:2MΩ
  • 5. Output wattage:3600W,15A/240VAC
  • 6. Storage temperature:-20~70℃
  • 7. Measure accuracy:0.25%FS(25℃)
  • 8. Control accuracy:
  • 0.25%FS(25℃)
  • 9. Main input:thermocouple K、J type
  • 10. Work temperature:0~50℃/32~122℉
  • 11. Work humidity:10%~80%RH(non-condensing)
Order Code:
  • TC5E-a-b-c-d-e-f
  • a:ZONE
       01:1 zone
       02:2 zones
       04:4 zones
       06:6 zones
       08:8 zones
       12:12 zones
  • b:Housing and Hood
       SHB:housing is single hook hood is single button
       DHB:housing is dual hook hood is dual button
       DBH:housing is dual button hood is dual hook
  • c:Power Wiring
       A0:A type 3-phase 4-wire 200~242VAC
       B0:B type 3-phase5-wire 380~415VAC
       A1:A type 3-phase 4-wire 200~242VAC
       B1:B type 3-phase5-wire 380~415VAC
  • d:Power Cable Length
       03:3m (standard)
  • e:O/P Connector Wiring
       A:A type
       B:B type
       C:C type
·         f:Cable Wiring
   00:without connection cable
 03:3m (standard)

加入询问单?

Name:
  • P500 Series Temperature Controllers
Features:
  • 1. Triple color LCD display and PV/SV value double color display for indication and alarm
  • 2. RS-485 communication.
  • 3. Current indication
  • 4. Retransmission
  • 5. Multi type output.
  • 6. Multi type sensor sign input
  • 7. Dual P.I.D. control for heating and cooling
  • 8. Freeze and compression output control
  • 9. Manual and soft-start output control
Specifications:
  • 1. Power supply : STD.—100~240VAC±10%,50/60Mz
  • 2. Display: 4 digital PV / SV value and triple color display
  • 3. Accuracy : 0.5%FSO(25℃)
  • 4. Input type:K、J、T、S、R、E、Pt100、0~5V、1-5V、0-10V、0-20mA、4-20mA
  • 5. Main/aux. output : relay(250V/5A)、voltage(DC24V/20 mA)、analog voltage(0~5V、1~5V、0~10V)、analog current(0~20mA、4~20mA)
  • 6. Alarm 1/2/3 output : relay(250V/5A)、voltage(DC24V/20 mA)
  • 7. Main output function:Heating or Cooling
  • 8. Alarm mode : 9
  • 9. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
  • 10. Dimension : 48*48、49*96、96*48、72*72、96*96 (unit:mm)
Order Code:
  • P100-PID temperature controller 1-2-3-4-5-6-7
  • 1:Model
       P100----48*48m/m
       P200----48*96m/m
       P300----72*72m/m
       P400----96*96m/m
       P500----96*48m/m
  • 2/3:Main/Aux. output
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
       I----analog current 0~20mA、4~20mA
       L---analog voltage 0~5V、1~5V、0~10V
  • 4/5/6:Alarm 1/2/3
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
  • 7:Other function
       1---RS485
       2---Retransmission
       3---Current indication
       4---Retransmission + Current indication
       5---RS485 + Current indication
       6---Without other function

Name:
  • P400 Series Temperature Controllers
Features:
  • 1. Triple color LCD display and PV/SV value double color display for indication and alarm
  • 2. RS-485 communication.
  • 3. Current indication
  • 4. Retransmission
  • 5. Multi type output.
  • 6. Multi type sensor sign input
  • 7. Dual P.I.D. control for heating and cooling
  • 8. Freeze and compression output control
  • 9. Manual and soft-start output control
Specifications:
  • 1. Power supply : STD.—100~240VAC±10%,50/60Mz
  • 2. Display: 4 digital PV / SV value and triple color display
  • 3. Accuracy : 0.5%FSO(25℃) 4. Input type:K、J、T、S、R、E、Pt100、0~5V、1-5V、0-10V、0-20mA、4-20mA
  • 5. Main/aux. output : relay(250V/5A)、voltage(DC24V/20 mA)、analog voltage(0~5V、1~5V、0~10V)、analog current(0~20mA、4~20mA)
  • 6. Alarm 1/2/3 output : relay(250V/5A)、voltage(DC24V/20 mA)
  • 7. Main output function:Heating or Cooling
  • 8. Alarm mode : 9
  • 9. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
  • 10. Dimension : 48*48、49*96、96*48、72*72、96*96 (unit:mm)
Order Code:
  • P100-PID temperature controller 1-2-3-4-5-6-7
  • 1:Model
       P100----48*48m/m
       P200----48*96m/m
       P300----72*72m/m
       P400----96*96m/m
  •    P500----96*48m/m
  • 2/3:Main/Aux. output
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
       I----analog current 0~20mA、4~20mA
       L---analog voltage 0~5V、1~5V、0~10V
  • 4/5/6:Alarm 1/2/3
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
  • 7:Other function
       1---RS485
       2---Retransmission
       3---Current indication
       4---Retransmission + Current indication
       5---RS485 + Current indication
       6---Without other function

Name:
  • P300 Series Temperature Controllers
Features:
  • 1. Triple color LCD display and PV/SV value double color display for indication and alarm
  • 2. RS-485 communication.
  • 3. Current indication
  • 4. Retransmission
  • 5. Multi type output.
  • 6. Multi type sensor sign input
  • 7. Dual P.I.D. control for heating and cooling
  • 8. Freeze and compression output control
  • 9. Manual and soft-start output control
Specifications:
  • 1. Power supply : STD.—100~240VAC±10%,50/60Mz
  • 2. Display: 4 digital PV / SV value and triple color display
  • 3. Accuracy : 0.5%FSO(25℃)
  • 4. Input type:K、J、T、S、R、E、Pt100、0~5V、1-5V、0-10V、0-20mA、4-20mA
  • 5. Main/aux. output : relay(250V/5A)、voltage(DC24V/20 mA)、analog voltage(0~5V、1~5V、0~10V)、analog current(0~20mA、4~20mA)
  • 6. Alarm 1/2/3 output : relay(250V/5A)、voltage(DC24V/20 mA)
  • 7. Main output function:Heating or Cooling
  • 8. Alarm mode : 9
  • 9. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
  • 10. Dimension : 48*48、49*96、96*48、72*72、96*96 (unit:mm)
Order Code:
  • P100-PID temperature controller 1-2-3-4-5-6-7
  • 1:Model
       P100----48*48m/m    P200----48*96m/m
       P300----72*72m/m
       P400----96*96m/m
       P500----96*48m/m
  • 2/3:Main/Aux. output
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
       I----analog current 0~20mA、4~20mA
       L---analog voltage 0~5V、1~5V、0~10V
  • 4/5/6:Alarm 1/2/3
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
  • 7:Other function  
  •   1---RS485
       2---Retransmission
       3---Current indication
       4---Retransmission + Current indication
       5---RS485 + Current indication
       6---Without other function

Name:
  • P200 Series Temperature Controllers
Features:
  • 1. Triple color LCD display and PV/SV value double color display for indication and alarm
  • 2. RS-485 communication.
  • 3. Current indication
  • 4. Retransmission
  • 5. Multi type output.
  • 6. Multi type sensor sign input
  • 7. Dual P.I.D. control for heating and cooling
  • 8. Freeze and compression output control
  • 9. Manual and soft-start output control
Specifications:
  • 1. Power supply : STD.—100~240VAC±10%,50/60Mz
  • 2. Display: 4 digital PV / SV value and triple color display
  • 3. Accuracy : 0.5%FSO(25℃)
  • 4. Input type:K、J、T、S、R、E、Pt100、0~5V、1-5V、0-10V、0-20mA、4-20mA
  • 5. Main/aux. output : relay(250V/5A)、voltage(DC24V/20 mA)、analog voltage(0~5V、1~5V、0~10V)、analog current(0~20mA、4~20mA)
  • 6. Alarm 1/2/3 output : relay(250V/5A)、voltage(DC24V/20 mA)
  • 7. Main output function:Heating or Cooling
  • 8. Alarm mode : 9
  • 9. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
  • 10. Dimension : 48*48、49*96、96*48、72*72、96*96 (unit:mm)
Order Code:
  • P100-PID temperature controller 1-2-3-4-5-6-7
  • 1:Model
       P100----48*48m/m
       P200----48*96m/m
       P300----72*72m/m
       P400----96*96m/m
       P500----96*48m/m
  • 2/3:Main/Aux. output
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
       I----analog current 0~20mA、4~20mA
       L---analog voltage 0~5V、1~5V、0~10V
  • 4/5/6:Alarm 1/2/3
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
  • 7:Other function
       1---RS485
       2---Retransmission
       3---Current indication
       4---Retransmission + Current indication
       5---RS485 + Current indication
       6---Without other function

Name:
  • P100 Series Temperature Controllers
Features:
  • 1. Triple color LCD display and PV/SV value double color display for indication and alarm
  • 2. RS-485 communication.
  • 3. Current indication
  • 4. Retransmission
  • 5. Multi type output.
  • 6. Multi type sensor sign input
  • 7. Dual P.I.D. control for heating and cooling
  • 8. Freeze and compression output control
  • 9. Manual and soft-start output control
Specifications:
  • 1. Power supply : STD.—100~240VAC±10%,50/60Mz
  • 2. Display: 4 digital PV / SV value and triple color display
  • 3. Accuracy : 0.5%FSO(25℃)
  • 4. Input type:K、J、T、S、R、E、Pt100、0~5V、1-5V、0-10V、0-20mA、4-20mA
  • 5. Main/aux. output : relay(250V/5A)、voltage(DC24V/20 mA)、analog voltage(0~5V、1~5V、0~10V)、analogcurrent(0~20mA、4~20mA)
  • 6. Alarm 1/2/3 output : relay(250V/5A)、voltage(DC24V/20 mA)
  • 7. Main output function:Heating or Cooling
  • 8. Alarm mode : 9
  • 9. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
  • 10. Dimension : 48*48、49*96、96*48、72*72、96*96 (unit:mm)
Order Code:
  • P100-PID temperature controller 1-2-3-4-5-6-7
  • 1:Model
       P100----48*48m/m
       P200----48*96m/m
       P300----72*72m/m
       P400----96*96m/m
       P500----96*48m/m
  • 2/3:Main/Aux. output
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
       I----analog current 0~20mA、4~20mA
       L---analog voltage 0~5V、1~5V、0~10V
  • 4/5/6:Alarm 1/2/3
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
  • 7:Other function
       1---RS485
  •    2---Retransmission
       3---Current indication
       4---Retransmission + Current indication
       5---RS485 + Current indication
       6---Without other function

Name:
  • V500 Temperature controllers
Features:
  • 1. The best performance-price ratio
  • 2. Push-button set-up
  • 3. P.I.D. auto-tuning;self-tuning;MAN/AUTO output
  • 4. Double display ( 4-digits)
  • 5. Six alarm output modes selectable
  • 6. Four output:main/aux、alarm1、alarm2
Specifications:
  • 1. Power Supply:100~240VAC±10%, 50/60HZ
  • 2. Display:2 * 4digits
  • 3. Key:4 machinery keys
  • 4. Accuracy:0.5%full scale (25℃)
  • 5. Main Input:TC: J、K /RTD: Pt100
  • 6. Main/aux output:Relay:250V(NO:7A / NC:5A) , Digital Voltage:DC24V/20mA , Analog volt.:0~10V,0~5V,1~5V , Analog current:0~20mA,4~20mA
  • 7. Alarm1/2 output:Relay:250V(NO:7A / NC:5A) , Digital Voltage:DC24V/20mA (* V100 output for aux. and alarm1/2 : 250V/5A)
  • 8. Function:Heating and cooling
  • 9. Control Mode:ON/OFF, PID (Self-tuning)
  • 10. Alarm Mode:6
  • 11. Ambient:Temperature:0~55℃(32℉~130℉)
  • 12. Humidity:10%~80%(non-condensing)
  • 13. Dimension:48*48、49*96、96*48、72*72、96*96 (unit:mm)
Order Code:
  • V100-PID temperature controller 1-2-3-4-5
  • 1:Model
       V100----48*48m/m
       V200----48*96m/m
       V300----72*72m/m
       V400----96*96m/m
       V500----96*48m/m
  • 2/3:Main/aux. output
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
       I----analog current 0~20mA、4~20mA
       L---analog voltage 0~5V、1~5V、0~10V
  • 4/5:Alarm1/2
       0----none
       R----relay
       V----digital voltage 24VDC/20mA

Name:
  • V400 Temperature controllers
Features:
  • 1. The best performance-price ratio
  • 2. Push-button set-up
  • 3. P.I.D. auto-tuning;self-tuning;MAN/AUTO output
  • 4. Double display ( 4-digits)
  • 5. Six alarm output modes selectable
  • 6. Four output:main/aux、alarm1、alarm2
Specifications:
  • 1. Power Supply:100~240VAC±10%, 50/60HZ
  • 2. Display:2 * 4digits
  • 3. Key:4 machinery keys
  • 4. Accuracy:0.5%full scale (25℃)
  • 5. Main Input:TC: J、K / RTD: Pt100
  • 6. Main/aux output:Relay:250V(NO:7A / NC:5A) , Digital Voltage:DC24V/20mA , Analog volt.:0~10V,0~5V,1~5V , Analog current:0~20mA,4~20mA
  • 7. Alarm1/2 output:Relay:250V(NO:7A / NC:5A) , Digital Voltage:DC24V/20mA (* V100 output for aux. and alarm1/2 : 250V/5A)
  • 8. Function:Heating and cooling
  • 9. Control Mode:ON/OFF, PID (Self-tuning)
  • 10. Alarm Mode:6
  • 11. Ambient:Temperature:0~55℃(32℉~130℉)
  • 12. Humidity:10%~80%(non-condensing)
  • 13. Dimension:48*48、49*96、96*48、72*72、96*96 (unit:mm)
Order Code:
  • V100-PID temperature controller 1-2-3-4-5
  • 1:Model
       V100----48*48m/m
       V200----48*96m/m
       V300----72*72m/m
       V400----96*96m/m
       V500----96*48m/m
  • 2/3:Main/aux. output
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
       I----analog current 0~20mA、4~20mA
       L---analog voltage 0~5V、1~5V、0~10V
  • 4/5:Alarm1/2
       0----none
       R----relay
       V----digital voltage 24VDC/20mA

Name:
  • V300 Temperature controllers
Features:
  • 1. The best performance-price ratio
  • 2. Push-button set-up
  • 3. P.I.D. auto-tuning;self-tuning;MAN/AUTO output
  • 4. Double display ( 4-digits)
  • 5. Six alarm output modes selectable
  • 6. Four output:main/aux、alarm1、alarm2
Specifications:
  • 1. Power Supply:100~240VAC±10%, 50/60HZ
  • 2. Display:2 * 4digits
  • 3. Key:4 machinery keys
  • 4. Accuracy:0.5%full scale (25℃)
  • 5. Main Input:TC: J、K / RTD: Pt100
  • 6. Main/aux output:Relay:250V(NO:7A / NC:5A) , Digital Voltage:DC24V/20mA , Analog volt.:0~10V,0~5V,1~5V , Analog current:0~20mA,4~20mA
  • 7. Alarm1/2 output:Relay:250V(NO:7A / NC:5A) , Digital Voltage:DC24V/20mA (* V100 output for aux. and alarm1/2 : 250V/5A)
  • 8. Function:Heating and cooling
  • 9. Control Mode:ON/OFF, PID (Self-tuning)
  • 10. Alarm Mode:6
  • 11. Ambient:Temperature:0~55℃(32℉~130℉)
  • 12. Humidity:10%~80%(non-condensing)
  • 13. Dimension:48*48、49*96、96*48、72*72、96*96 (unit:mm)
Order Code:
  • V100-PID temperature controller 1-2-3-4-5
  • 1:Model
       V100----48*48m/m
       V200----48*96m/m
       V300----72*72m/m
       V400----96*96m/m
       V500----96*48m/m
  • 2/3:Main/aux. output
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
       I----analog current 0~20mA、4~20mA
       L---analog voltage 0~5V、1~5V、0~10V
  • 4/5:Alarm1/2
       0----none
       R----relay
       V----digital voltage 24VDC/20mA

Name:
  • V200 Temperature controllers
Features:
  • 1. The best performance-price ratio
  • 2. Push-button set-up
  • 3. P.I.D. auto-tuning;self-tuning;MAN/AUTO output
  • 4. Double display ( 4-digits)
  • 5. Six alarm output modes selectable
  • 6. Four output:main/aux、alarm1、alarm2
Specifications:
  • 1. Power Supply:100~240VAC±10%, 50/60HZ
  • 2. Display:2 * 4digits
  • 3. Key:4 machinery keys
  • 4. Accuracy:0.5%full scale (25℃)
  • 5. Main Input:TC: J、K / RTD: Pt100
  • 6. Main/aux output:Relay:250V(NO:7A / NC:5A) , Digital Voltage:DC24V/20mA , Analog volt.:0~10V,0~5V,1~5V , Analog current:0~20mA,4~20mA
  • 7. Alarm1/2 output:Relay:250V(NO:7A / NC:5A) , Digital Voltage:DC24V/20mA (* V100 output for aux. and alarm1/2 : 250V/5A)
  • 8. Function:Heating and cooling
  • 9. Control Mode:ON/OFF, PID (Self-tuning)
  • 10. Alarm Mode:6
  • 11. Ambient:Temperature:0~55℃(32℉~130℉)
  • 12. Humidity:10%~80%(non-condensing)
  • 13. Dimension:48*48、49*96、96*48、72*72、96*96 (unit:mm)
Order Code:
  • V100-PID temperature controller 1-2-3-4-5
  • 1:Model
       V100----48*48m/m
       V200----48*96m/m
       V300----72*72m/m
       V400----96*96m/m
       V500----96*48m/m
  • 2/3:Main/aux. output
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
       I----analog current 0~20mA、4~20mA
       L---analog voltage 0~5V、1~5V、0~10V
  • 4/5:Alarm1/2
       0----none
       R----relay
       V----digital voltage 24VDC/20mA

Name:
  • V100 Temperature controllers
Features:
  • 1. The best performance-price ratio
  • 2. Push-button set-up
  • 3. P.I.D. auto-tuning;self-tuning;MAN/AUTO output
  • 4. Double display ( 4-digits)
  • 5. Six alarm output modes selectable
  • 6. Four output:main/aux、alarm1、alarm2
Specifications:
  • 1. Power Supply:100~240VAC±10%, 50/60HZ
  • 2. Display:2 * 4digits
  • 3. Key:4 machinery keys
  • 4. Accuracy:0.5%full scale (25℃)
  • 5. Main Input:TC: J、K / RTD: Pt100
  • 6. Main/aux output:Relay:250V(NO:7A / NC:5A) , Digital Voltage:DC24V/20mA , Analog volt.:0~10V,0~5V,1~5V , Analog current:0~20mA,4~20mA
  • 7. Alarm1/2 output:Relay:250V(NO:7A / NC:5A) , Digital Voltage:DC24V/20mA (* V100 output for aux. and alarm1/2 : 250V/5A)
  • 8. Function:Heating and cooling
  • 9. Control Mode:ON/OFF, PID (Self-tuning)
  • 10. Alarm Mode:6
  • 11. Ambient:Temperature:0~55℃(32℉~130℉)
  • 12. Humidity:10%~80%(non-condensing)
  • 13. Dimension:48*48、49*96、96*48、72*72、96*96 (unit:mm)
Order Code:
  • V100-PID temperature controller 1-2-3-4-5
  • 1:Model
       V100----48*48m/m
       V200----48*96m/m
       V300----72*72m/m
       V400----96*96m/m
       V500----96*48m/m
  • 2/3:Main/aux. output
       0----none
       R----relay
       V----digital voltage 24VDC/20mA
       I----analog current 0~20mA、4~20mA
       L---analog voltage 0~5V、1~5V、0~10V
  • 4/5:Alarm1/2
       0----none
       R----relay
       V----digital voltage 24VDC/20mA

Name:
  • S100 Temperature controllers
Features:
  • 1、Back housing short-design for wiring.
  • 2、Cool on price and hot performance.
  • 3、PID-auto tuning for accurate control.
  • 4、Simple structure and easy installation.
  • 5、Manual and auto output.
  • 6、Hot plugging design.
Specifications:
  • 1.Power Supply:100~240VAC±10%, 50/60HZ
  • 2.Display:2 * 4digits
  • 3.Key:4 machinery keys
  • 4.Accuracy:0.5%full scale (25℃)
  • 5.Main Input:TC: J、K      RTD: Pt100
  • 6.Output:Main / aux
  • output:(Aux. output only for S200)
  • 7.Relay:250V NO:7A / NC:5A
  • 8.Digital.Voltage:DC24V/20mA
  • 9.Analog volt.:0~10V,0~5V,1~5V
  • 10.Analog current:0~20mA,4~20mA
       Alarm1/2:(Alarm2 only for S200)
  • 11.Relay:250V NO:7A / NC:5A
  • 12.Digital Voltage:DC24V/20mA   (* S100 output for aux. and alarm1/2 : 250V/5A)
  • 13.Function:Heating and cooling
  • 14.Control Mode:ON/OFF, PID (Self-tuning)
  • 15.Alarm Mode:6
  • 16.Ambient:Temperature:0~55℃(32℉~130℉)
  • 17. Humidity:10%~80%(non-condensing)
Order Code:
  • S100溫控器 1-2-3-4-5-6-7-8
  • 1:Model
       S100----48*48m/m
       S200----48*96m/m
  • 2/3:Main/Aux. Output
       0----None
       R----Relay
       V----Digital volt. Output 24V/20mA
       I----Analog current output出0~20mA、4~20mA
       L---Analog volt. Output 0~10V、0~5V、1~5V
  • 4/5:Alarm 1/2
       0----None
       R----Relay
       V----Digital volt. Output 24V/20mA
  • 6:Input Type
       J0----without decimal point
       J1----with decimal point
       K0----without decimal point
       K1----with decimal point
       P0----without decimal point
       P1----with decimal
  • 7:Main Output Heating & Cooling
       H----Heating
       C----Cooling
    8:Temperature Unit
       C----Centigrade
       F----Fahrenheit

Name:
  • TC4DO Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Heater-break indication selectable
  • 4. 5 alarm output modes selectable
Specifications:
  • SPECIFICATION:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Supply voltage:110/220VDC
  • 11. Control:Relay contact 1C 250VDC 5Amp(max)
  • 12. Voltage output:DC5V、20mA、HI-level:DC5V+1V、LO-level:DC0.5V
  • 13. Alarm modes:5
  • 14. Dimensions:48*96、49*96、72*72、96*96 (unit:mm)
  • 15. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
Order Code:
  • TC Temperature controller 1-2-3-4-5-6-7-8
  • 1:Dimensions
       TC2----48*96mm
       TC3----72*72mm
       TC4----96*96mm
       H2DA----48*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
       O----without setting
  • 3:Display
       D----digital display
       A----analog display
       O----without display
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with 1 alarm
       0----without alarm
  • 7:Heater break select
       H----H/B alarm
       N----without H/B alarm
  • 8:Thermocouple
       K----K type
       J----J type

Name:
  • TC4AA Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Heater-break indication selectable
  • 4. 5 alarm output modes selectable
Specifications:
  • SPECIFICATION:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Supply voltage:110/220VDC
  • 11. Control:Relay contact 1C 250VDC 5Amp(max)
  • 12. Voltage output:DC5V、20mA、HI-level:DC5V+1V、LO-level:DC0.5V
  • 13. Alarm modes:5
  • 14. Dimensions:48*96、49*96、72*72、96*96 (unit:mm)
  • 15. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
Order Code:
  • TC Temperature controller 1-2-3-4-5-6-7-8
  • 1:Dimensions
       TC2----48*96mm
       TC3----72*72mm
       TC4----96*96mm
       H2DA----48*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
       O----without setting
  • 3:Display
       D----digital display
       A----analog display
       O----without display
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with 1 alarm
       0----without alarm
  • 7:Heater break select
       H----H/B alarm
       N----without H/B alarm
  • 8:Thermocouple
       K----K type
       J----J type

Name:
  • TC4DA Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Heater-break indication selectable
  • 4. 5 alarm output modes selectable
Specifications:
  • SPECIFICATION:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Supply voltage:110/220VDC
  • 11. Control:Relay contact 1C 250VDC 5Amp(max)
  • 12. Voltage output:DC5V、20mA、HI-level:DC5V+1V、LO-level:DC0.5V
  • 13. Alarm modes:5
  • 14. Dimensions:48*96、49*96、72*72、96*96 (unit:mm)
  • 15. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
Order Code:
  • TC Temperature controller 1-2-3-4-5-6-7-8
  • 1:Dimensions
       TC2----48*96mm
       TC3----72*72mm
       TC4----96*96mm
       H2DA----48*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
       O----without setting
  • 3:Display
       D----digital display
       A----analog display
       O----without display
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with 1 alarm
       0----without alarm
  • 7:Heater break select
       H----H/B alarm
       N----without H/B alarm
  • 8:Thermocouple
       K----K type
       J----J type

Name:
  • TC4DD Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Heater-break indication selectable
  • 4. 5 alarm output modes selectable
Specifications:
  • SPECIFICATION:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Supply voltage:110/220VDC
  • 11. Control:Relay contact 1C 250VDC 5Amp(max)
  • 12. Voltage output:DC5V、20mA、HI-level:DC5V+1V、LO-level:DC0.5V
  • 13. Alarm modes:5
  • 14. Dimensions:48*96、49*96、72*72、96*96 (unit:mm)
  • 15. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
Order Code:
  • TC Temperature controller 1-2-3-4-5-6-7-8
  • 1:Dimensions
       TC2----48*96mm
       TC3----72*72mm
       TC4----96*96mm
       H2DA----48*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
       O----without setting
  • 3:Display
       D----digital display
       A----analog display
       O----without display
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with 1 alarm
       0----without alarm
  • 7:Heater break select
       H----H/B alarm
       N----without H/B alarm
  • 8:Thermocouple
       K----K type
       J----J type

Name:
  • TC4AD Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Heater-break indication selectable
  • 4. 5 alarm output modes selectable
Specifications:
  • SPECIFICATION:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Supply voltage:110/220VDC
  • 11. Control:Relay contact 1C 250VDC 5Amp(max)
  • 12. Voltage output:DC5V、20mA、HI-level:DC5V+1V、LO-level:DC0.5V
  • 13. Alarm modes:5
  • 14. Dimensions:48*96、49*96、72*72、96*96 (unit:mm)
  • 15. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
Order Code:
  • TC Temperature controller 1-2-3-4-5-6-7-8
  • 1:Dimensions
       TC2----48*96mm
       TC3----72*72mm
       TC4----96*96mm
       H2DA----48*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
       O----without setting
  • 3:Display
       D----digital display
       A----analog display
       O----without display
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with 1 alarm
       0----without alarm
  • 7:Heater break select
       H----H/B alarm
       N----without H/B alarm
  • 8:Thermocouple
       K----K type
       J----J type

Name:
  • TC4AO Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Heater-break indication selectable
  • 4. 5 alarm output modes selectable
Specifications:
  • SPECIFICATION:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Supply voltage:110/220VDC
  • 11. Control:Relay contact 1C 250VDC 5Amp(max)
  • 12. Voltage output:DC5V、20mA、HI-level:DC5V+1V、LO-level:DC0.5V
  • 13. Alarm modes:5
  • 14. Dimensions:48*96、49*96、72*72、96*96 (unit:mm)
  • 15. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
Order Code:
  • TC Temperature controller 1-2-3-4-5-6-7-8
  • 1:Dimensions
       TC2----48*96mm
       TC3----72*72mm
       TC4----96*96mm
       H2DA----48*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
       O----without setting
  • 3:Display
       D----digital display
       A----analog display
       O----without display
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with 1 alarm
       0----without alarm
  • 7:Heater break select
       H----H/B alarm
       N----without H/B alarm
  • 8:Thermocouple
       K----K type
       J----J type

Name:
  • TC3DD Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Heater-break indication selectable
  • 4. 5 alarm output modes selectable
Specifications:
  • SPECIFICATION:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Supply voltage:110/220VDC
  • 11. Control:Relay contact 1C 250VDC 5Amp(max)
  • 12. Voltage output:DC5V、20mA、HI-level:DC5V+1V、LO-level:DC0.5V
  • 13. Alarm modes:5
  • 14. Dimensions:48*96、49*96、72*72、96*96 (unit:mm)
  • 15. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
Order Code:
  • TC Temperature controller 1-2-3-4-5-6-7-8
  • 1:Dimensions
       TC2----48*96mm
       TC3----72*72mm
       TC4----96*96mm
       H2DA----48*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
       O----without setting
  • 3:Display
       D----digital display
       A----analog display
       O----without display
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with 1 alarm
       0----without alarm
  • 7:Heater break select
       H----H/B alarm
       N----without H/B alarm
  • 8:Thermocouple
       K----K type
       J----J type

Name:
  • TC3DA Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Heater-break indication selectable
  • 4. 5 alarm output modes selectable
Specifications:
  • SPECIFICATION:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Supply voltage:110/220VDC
  • 11. Control:Relay contact 1C 250VDC 5Amp(max)
  • 12. Voltage output:DC5V、20mA、HI-level:DC5V+1V、LO-level:DC0.5V
  • 13. Alarm modes:5
  • 14. Dimensions:48*96、49*96、72*72、96*96 (unit:mm)
  • 15. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
Order Code:
  • TC Temperature controller 1-2-3-4-5-6-7-8
  • 1:Dimensions
       TC2----48*96mm
       TC3----72*72mm
       TC4----96*96mm
       H2DA----48*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
       O----without setting
  • 3:Display
       D----digital display
       A----analog display
       O----without display
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with 1 alarm
       0----without alarm
  • 7:Heater break select
       H----H/B alarm
       N----without H/B alarm
  • 8:Thermocouple
       K----K type
       J----J type

Name:
  • TC3DOTemperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Heater-break indication selectable
  • 4. 5 alarm output modes selectable
Specifications:
  • SPECIFICATION:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Supply voltage:110/220VDC
  • 11. Control:Relay contact 1C 250VDC 5Amp(max)
  • 12. Voltage output:DC5V、20mA、HI-level:DC5V+1V、LO-level:DC0.5V
  • 13. Alarm modes:5
  • 14. Dimensions:48*96、49*96、72*72、96*96 (unit:mm)
  • 15. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
Order Code:
  • TC Temperature controller 1-2-3-4-5-6-7-8
  • 1:Dimensions
       TC2----48*96mm
       TC3----72*72mm
       TC4----96*96mm
       H2DA----48*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
       O----without setting
  • 3:Display
       D----digital display
       A----analog display
       O----without display
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with 1 alarm
       0----without alarm
  • 7:Heater break select
       H----H/B alarm
       N----without H/B alarm
  • 8:Thermocouple
       K----K type
       J----J type

Name:
  • TC3AA Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Heater-break indication selectable
  • 4. 5 alarm output modes selectable
Specifications:
  • SPECIFICATION:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Supply voltage:110/220VDC
  • 11. Control:Relay contact 1C 250VDC 5Amp(max)
  • 12. Voltage output:DC5V、20mA、HI-level:DC5V+1V、LO-level:DC0.5V
  • 13. Alarm modes:5
  • 14. Dimensions:48*96、49*96、72*72、96*96 (unit:mm)
  • 15. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
Order Code:
  • TC Temperature controller 1-2-3-4-5-6-7-8
  • 1:Dimensions
       TC2----48*96mm
       TC3----72*72mm
       TC4----96*96mm
       H2DA----48*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
       O----without setting
  • 3:Display
       D----digital display
       A----analog display
       O----without display
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with 1 alarm
       0----without alarm
  • 7:Heater break select
       H----H/B alarm
       N----without H/B alarm
  • 8:Thermocouple
       K----K type
       J----J type

Name:
  • TC3AD  Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Heater-break indication selectable
  • 4. 5 alarm output modes selectable
Specifications:
  • SPECIFICATION:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Supply voltage:110/220VDC
  • 11. Control:Relay contact 1C 250VDC 5Amp(max)
  • 12. Voltage output:DC5V、20mA、HI-level:DC5V+1V、LO-level:DC0.5V
  • 13. Alarm modes:5
  • 14. Dimensions:48*96、49*96、72*72、96*96 (unit:mm)
  • 15. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
Order Code:
  • TC Temperature controller 1-2-3-4-5-6-7-8
  • 1:Dimensions
       TC2----48*96mm
       TC3----72*72mm
       TC4----96*96mm
       H2DA----48*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
       O----without setting
  • 3:Display
       D----digital display
       A----analog display
       O----without display
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with 1 alarm
       0----without alarm
  • 7:Heater break select
       H----H/B alarm
       N----without H/B alarm
  • 8:Thermocouple
       K----K type
       J----J type

Name:
  • TC3AO Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Heater-break indication selectable
  • 4. 5 alarm output modes selectable
Specifications:
  • SPECIFICATION:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Supply voltage:110/220VDC
  • 11. Control:Relay contact 1C 250VDC 5Amp(max)
  • 12. Voltage output:DC5V、20mA、HI-level:DC5V+1V、LO-level:DC0.5V
  • 13. Alarm modes:5
  • 14. Dimensions:48*96、49*96、72*72、96*96 (unit:mm)
  • 15. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
Order Code:
  • TC Temperature controller 1-2-3-4-5-6-7-8
  • 1:Dimensions
       TC2----48*96mm
       TC3----72*72mm
       TC4----96*96mm
       H2DA----48*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
       O----without setting
  • 3:Display
       D----digital display
       A----analog display
       O----without display
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with 1 alarm
       0----without alarm
  • 7:Heater break select
       H----H/B alarm
       N----without H/B alarm
  • 8:Thermocouple
       K----K type
       J----J type

Name:
  • TC2DD Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Heater-break indication selectable
  • 4. 5 alarm output modes selectable
Specifications:
  • SPECIFICATION:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Supply voltage:110/220VDC
  • 11. Control:Relay contact 1C 250VDC 5Amp(max)
  • 12. Voltage output:DC5V、20mA、HI-level:DC5V+1V、LO-level:DC0.5V
  • 13. Alarm modes:5
  • 14. Dimensions:48*96、49*96、72*72、96*96 (unit:mm)
  • 15. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
Order Code:
  • TC Temperature controller 1-2-3-4-5-6-7-8
  • 1:Dimensions
       TC2----48*96mm
       TC3----72*72mm
       TC4----96*96mm
       H2DA----48*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
       O----without setting
  • 3:Display
       D----digital display
       A----analog display
       O----without display
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with 1 alarm
       0----without alarm
  • 7:Heater break select
       H----H/B alarm
       N----without H/B alarm
  • 8:Thermocouple
       K----K type
       J----J type

Name:
  • TC2DA Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Heater-break indication selectable
  • 4. 5 alarm output modes selectable
Specifications:
  • SPECIFICATION:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Supply voltage:110/220VDC
  • 11. Control:Relay contact 1C 250VDC 5Amp(max)
  • 12. Voltage output:DC5V、20mA、HI-level:DC5V+1V、LO-level:DC0.5V
  • 13. Alarm modes:5
  • 14. Dimensions:48*96、49*96、72*72、96*96 (unit:mm)
  • 15. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity 10%~80% (non-condensing)
Order Code:
  • TC Temperature controller 1-2-3-4-5-6-7-8
  • 1:Dimensions
       TC2----48*96mm
       TC3----72*72mm
       TC4----96*96mm
       H2DA----48*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
       O----without setting
  • 3:Display
       D----digital display
       A----analog display
       O----without display
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with 1 alarm
       0----without alarm
  • 7:Heater break select
       H----H/B alarm
       N----without H/B alarm
  • 8:Thermocouple
       K----K type
       J----J type

Name:
  • A4DD Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Draw out panel
  • 4. 5 alarm output modes selectable
Specifications:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Power consumption:2W
  • 11. Alarm modes:5
  • 12. Dimensions:48*48、48*96、72*72、96*96 (Unit:mm)
13. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity
  • 10%~80% (non-condensing)
Order Code:
  • A1 Temperature controller A-1-2-3-4-5-6-7
  • 1:Dimensions
       1----48*48mm
       2----48*96mm
       3----72*72mm
       4----96*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
  • 3:Display
       D----digital display
       A----analog display
       N----display none
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with alarm
       0----without alarm
  • 7:Thermocouple
       K----K type
       J----J type
       P----Pt100

Name:
  • A4DA Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Draw out panel
  • 4. 5 alarm output modes selectable
Specifications:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Power consumption:2W
  • 11. Alarm modes:5
  • 12. Dimensions:48*48、48*96、72*72、96*96 (Unit:mm)
13. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity
  • 10%~80% (non-condensing)
Order Code:
  • A1 Temperature controller A-1-2-3-4-5-6-7
  • 1:Dimensions
       1----48*48mm
       2----48*96mm
       3----72*72mm
       4----96*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
  • 3:Display
       D----digital display
       A----analog display
       N----display none
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with alarm
       0----without alarm
  • 7:Thermocouple
       K----K type
       J----J type
       P----Pt100

Name:
  • A4AD Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Draw out panel
  • 4. 5 alarm output modes selectable
Specifications:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Power consumption:2W
  • 11. Alarm modes:5
  • 12. Dimensions:48*48、48*96、72*72、96*96 (Unit:mm)
  • 13. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity10%~80% (non-condensing)
Order Code:
  • A1 Temperature controller A-1-2-3-4-5-6-7
  • 1:Dimensions
       1----48*48mm
       2----48*96mm
       3----72*72mm
       4----96*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
  • 3:Display
       D----digital display
       A----analog display
       N----display none
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with alarm
       0----without alarm
  • 7:Thermocouple
       K----K type
       J----J type
       P----Pt100

Name:
  • A4AATemperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Draw out panel
  • 4. 5 alarm output modes selectable
Specifications:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Power consumption:2W
  • 11. Alarm modes:5
  • 12. Dimensions:48*48、48*96、72*72、96*96 (Unit:mm)
  • 13. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity10%~80% (non-condensing)
Order Code:
  • A1 Temperature controller A-1-2-3-4-5-6-7
  • 1:Dimensions
       1----48*48mm
       2----48*96mm
       3----72*72mm
       4----96*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
  • 3:Display
       D----digital display
       A----analog display
       N----display none
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with alarm
       0----without alarm
  • 7:Thermocouple
       K----K type
       J----J type
       P----Pt100

Name:
  • A4ANTemperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Draw out panel
  • 4. 5 alarm output modes selectable
Specifications:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Power consumption:2W
  • 11. Alarm modes:5
  • 12. Dimensions:48*48、48*96、72*72、96*96 (Unit:mm)
  • 13. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity10%~80% (non-condensing)
Order Code:
  • A1 Temperature controller A-1-2-3-4-5-6-7
  • 1:Dimensions
       1----48*48mm
       2----48*96mm
       3----72*72mm
       4----96*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
  • 3:Display
       D----digital display
       A----analog display
       N----display none
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with alarm
       0----without alarm
  • 7:Thermocouple
       K----K type
       J----J type
       P----Pt100

Name:
  • A3DD Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Draw out panel
  • 4. 5 alarm output modes selectable
Specifications:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Power consumption:2W
  • 11. Alarm modes:5
  • 12. Dimensions:48*48、48*96、72*72、96*96 (Unit:mm)
  • 13. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity10%~80% (non-condensing)
Order Code:
  • A1 Temperature controller A-1-2-3-4-5-6-7
  • 1:Dimensions
       1----48*48mm
       2----48*96mm
       3----72*72mm
       4----96*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
  • 3:Display
       D----digital display
       A----analog display
       N----display none
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with alarm
       0----without alarm
  • 7:Thermocouple
       K----K type
       J----J type
       P----Pt100

Name:
  • A3DA Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Draw out panel
  • 4. 5 alarm output modes selectable
Specifications:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Power consumption:2W
  • 11. Alarm modes:5
  • 12. Dimensions:48*48、48*96、72*72、96*96 (Unit:mm)
  • 13. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity10%~80% (non-condensing)
Order Code:
  • A1 Temperature controller A-1-2-3-4-5-6-7
  • 1:Dimensions
       1----48*48mm
       2----48*96mm
       3----72*72mm
       4----96*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
  • 3:Display
       D----digital display
       A----analog display
       N----display none
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with alarm
       0----without alarm
  • 7:Thermocouple
       K----K type
       J----J type
       P----Pt100

Name:
  • A3AD Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Draw out panel
  • 4. 5 alarm output modes selectable
Specifications:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Power consumption:2W
  • 11. Alarm modes:5
  • 12. Dimensions:48*48、48*96、72*72、96*96 (Unit:mm)
  • 13. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity10%~80% (non-condensing)
Order Code:
  • A1 Temperature controller A-1-2-3-4-5-6-7
  • 1:Dimensions
       1----48*48mm
       2----48*96mm
       3----72*72mm
       4----96*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
  • 3:Display
       D----digital display
       A----analog display
       N----display none
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with alarm
       0----without alarm
  • 7:Thermocouple
       K----K type
       J----J type
       P----Pt100

Name:
  • A3AA Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Draw out panel
  • 4. 5 alarm output modes selectable
Specifications:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Power consumption:2W
  • 11. Alarm modes:5
  • 12. Dimensions:48*48、48*96、72*72、96*96 (Unit:mm)
  • 13. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity10%~80% (non-condensing)
Order Code:
  • A1 Temperature controller A-1-2-3-4-5-6-7
  • 1:Dimensions
       1----48*48mm
       2----48*96mm
       3----72*72mm
       4----96*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
  • 3:Display
       D----digital display
       A----analog display
       N----display none
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with alarm
       0----without alarm
  • 7:Thermocouple
       K----K type
       J----J type
       P----Pt100

Name:
  • A3AN  Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Draw out panel
  • 4. 5 alarm output modes selectable
Specifications:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Power consumption:2W
  • 11. Alarm modes:5
  • 12. Dimensions:48*48、48*96、72*72、96*96 (Unit:mm)
13. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity
  • 10%~80% (non-condensing)
Order Code:
  • A1 Temperature controller A-1-2-3-4-5-6-7
  • 1:Dimensions
       1----48*48mm
       2----48*96mm
       3----72*72mm
       4----96*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
  • 3:Display
       D----digital display
       A----analog display
       N----display none
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with alarm
       0----without alarm
  • 7:Thermocouple
       K----K type
       J----J type
       P----Pt100

Name:
  • A2DD Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Draw out panel
  • 4. 5 alarm output modes selectable
Specifications:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Power consumption:2W
  • 11. Alarm modes:5
  • 12. Dimensions:48*48、48*96、72*72、96*96 (Unit:mm)
13. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity
  • 10%~80% (non-condensing)
Order Code:
  • A1 Temperature controller A-1-2-3-4-5-6-7
  • 1:Dimensions
       1----48*48mm
       2----48*96mm
       3----72*72mm
       4----96*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
  • 3:Display
       D----digital display
       A----analog display
       N----display none
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with alarm
       0----without alarm
  • 7:Thermocouple
       K----K type
       J----J type
       P----Pt100

Name:
  • A2DA   Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Draw out panel
  • 4. 5 alarm output modes selectable
Specifications:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Power consumption:2W
  • 11. Alarm modes:5
  • 12. Dimensions:48*48、48*96、72*72、96*96 (Unit:mm)
13. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity
  • 10%~80% (non-condensing)
Order Code:
  • A1 Temperature controller A-1-2-3-4-5-6-7
  • 1:Dimensions
       1----48*48mm
       2----48*96mm
       3----72*72mm
       4----96*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
  • 3:Display
       D----digital display
       A----analog display
       N----display none
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with alarm
       0----without alarm
  • 7:Thermocouple
       K----K type
       J----J type
       P----Pt100

Name:
  • A1DN Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Draw out panel
  • 4. 5 alarm output modes selectable
Specifications:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Power consumption:2W
  • 11. Alarm modes:5
  • 12. Dimensions:48*48、48*96、72*72、96*96 (Unit:mm)
13. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity
  • 10%~80% (non-condensing)
Order Code:
  • A1 Temperature controller A-1-2-3-4-5-6-7
  • 1:Dimensions
       1----48*48mm
       2----48*96mm
       3----72*72mm
       4----96*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
  • 3:Display
       D----digital display
       A----analog display
       N----display none
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with alarm
       0----without alarm
  • 7:Thermocouple
       K----K type
       J----J type
       P----Pt100

Name:
  • A1AN Temperature controller
Features:
  • 1. With thermocouple-break indication
  • 2. ON/OFF or proportional control selectable
  • 3. Draw out panel
  • 4. 5 alarm output modes selectable
Specifications:
  • 1. Power supply:110/220VAC
  • 2. Input Type:Thermocouple K、J、Pt100
  • 3. Setting Accuracy:±0.5﹪of full scale
  • 4. Indication Accuracy:±0.5﹪of full scale
  • 5. Control Mode:ON/OFF action、Proportional action
  • 6. Proportional band:3﹪of full scale(fixed)
  • 7. Proportional recycle:Relay output 20 sec、Current output 2sec
  • 8. Reset Range:3﹪of full scale
  • 9. Ambient Temperature:-10~+55℃
  • 10. Power consumption:2W
  • 11. Alarm modes:5
  • 12. Dimensions:48*48、48*96、72*72、96*96 (Unit:mm)
13. Ambient condition : Temperature 0~55℃/32~130℉ & Humidity
  • 10%~80% (non-condensing)
Order Code:
  • A1 Temperature controller A-1-2-3-4-5-6-7
  • 1:Dimensions
       1----48*48mm
       2----48*96mm
       3----72*72mm
       4----96*96mm
  • 2:Setting
       D----digital setting
       A----analog setting
  • 3:Display
       D----digital display
       A----analog display
       N----display none
  • 4:Output
       R----relay
       V----voltage
  • 5:Control type
       P----proportional type
       O----ON/OFF type
  • 6:Alarm
       A----with alarm
       0----without alarm
  • 7:Thermocouple
       K----K type
       J----J type
       P----Pt100

Name:
  • FC Type Injection Molding Machine Controllers
Features:
  •  Using high speed 16Bit CPUu
  •  320*240 or 240*128 pixels LCD displayu
  •  Graphic mode display, bilingual for English and second foreign languageu are selectable on panel.
  •  Data locked by hardwareu & software to avoid improper setting.
  •  Fully machine running status display on screen, alarm status display, etcu
  •  Main system rack installed common Bus board, easy pull of boards.u
  •  4 channels A/D ,2 channels D/A 8 Zones of temperature control , Autou tuning P.I.D. with high accuracy and response. Expand to 12 zones for optional(D/A 4 channels for optional ).
  •  Data memory-- up to 60 sets of data memory.u
  •  Thermocouple break alarm function;or Heater Break alarm function.u
  •  Software calibration of potentiometer, easy and quick.u
  •  Pressure, Speed linear calibration provides an accurate output signal tou proportional valve control. Pulse counter 1000 pulse
  • per second or up to 10,000 pulse per second isu available for optional.
  •  Input and output signal monitoring screen.u
  •  4 steps injection, 4 step hold pressure with individual pressure and speedu setting. Hold pressure switching functions selected by Timer or Position.
  •  Auto mold height adjustment;auto lubrication;auto purge functions providedu
  •  Every action with independent slope and delay time setting.u

Name:
  • MA Type Injection Molding Machine Controllers
Features:
  •  Separated display interface and operational panel made perfect combinationu on function and price balance
  •  Modulized PCB design for easy expansion and easy maintenanceu
  •  Operate on an Ethernet PC LAN using TCP/IP, enabling easy to send datau from machine to remote PC as monitoring purpose or data
  • acquisition.
  •  Pressure/Speed of hydraulic system controlled by slope and delay timeu setting for
  • smooth motion.
  •  Multilingual display -- Includes English/Japanese/Chinese/Spanish Europeanu or Korean language available, too.
  •  Core/ Unscrew optional Hydraulic / electrical for device select on screen,u with
  • timer/Counter/ Switch selector, enabling use of different operation.
  •  Metrics/USA/ISO unit
  • switching directly on screen, provides different areau using
  • for operator.
  •  Temperature profile -- with 60/120/180/240 minutes variable time scaleu select.
  •  Temperature scale enabling a flexible viewing of the trend of temperatureu control
  •  Multi-level of password setting- This password control provides authorizedu
  • person to modify data, it avoids an improper setting by unauthorized operator.
  •  Printing-At local site of machine can connect to printer directly printu out the
  • screen or molding data listing, Quick for recording information.
  •  Alarm History recording .u
  •  Data setting history .u
  •  Trend graphic allows operator seeing the molding situation andu distribution on
  • screen, it is very useful for defect cycle and products inspection

Name:
  • FA Type Injection Molding Machine Controllers
Features:
  •  Using high speed 16Bit CPUu
  •  320*240 or 240*128 pixels LCD displayu
  •  Graphic mode display, bilingual for English and second foreign languageu are selectable on panel.
  •  Data locked by hardwareu & software to avoid improper setting.
  •  Fully machine running status display on screen, alarm status display, etcu
  •  Main system rack installed common Bus board, easy pull of boards.u
  •  4 channels A/D ,2 channels D/A 8 Zones of temperature control , Autou tuning P.I.D. with high accuracy and response. Expand to 12 zones for optional(D/A 4 channels for optional ).
  •  Data memory-- up to 60 sets of data memory.u
  •  Thermocouple break alarm function;or Heater Break alarm function.u
  •  Software calibration of potentiometer, easy and quick.u
  •  Pressure, Speed linear calibration provides an accurate output signal tou proportional valve control.
  •  Pulse counter 1000 pulse
  • per second or up to 10,000 pulse per second isu available for optional.
  •  Input and output signal monitoring screen.u
  •  4 steps injection, 4 step hold pressure with individual pressure and speedu setting. Hold pressure switching functions selected by Timer or Position.
  •  Auto mold height adjustment;auto lubrication;auto purge functions providedu
  •  Every action with independent slope and delay time setting.u

Name:
  • M Type Injection Molding Machine Controllers
Features:
  •  Operate on an Ethernet PC LAN using TCP/IP, enabling easy to send datau from machine to remote PC as monitoring purpose or data acquisition.
  •  Pressure/Speed of hydraulic system controlled by slope and delay timeu setting for
  • smooth motion.
  •  Multilingual display -- Includes English/Japanese/Chinese/Spanish Europeanu or Korean language available, too.
  •  Core/ Unscrew optional Hydraulic / electrical for device select on screen,u with
  • timer/Counter/ Switch selector, enabling use of different operation.
  •  Metrics/USA/ISO unit switching directly on screen, provides different areau using
  • for operator.
  •  Temperature profile -- with 60/120/180/240 minutes variable time scaleu select.
  •  Temperature scale enabling a flexible viewing of the trend
  • of temperatureu control
  •  Multi-level of password setting- This password control provides authorizedu
  • person to modify data, it avoids an improper setting by unauthorized operator.
  •  Printing-At local site of machine can connect to printer directly printu out the
  • screen or molding data listing, Quick for recording information.
  •  Alarm History recording .u
  •  Data setting history .u
  •  Trend graphic allows operator seeing the molding situation andu distribution on
  • screen, it is very useful for defect cycle and products inspection

Name:
  • SY Slim Strong Relay
Features:
  • 1. 2-Thyristor design, high voltage and current resistance
  • 2. Built-in thermal pad that avoids installation problems or quality concerns
  • 3. Super slim figure that takes minimal space in the frame
  • 4. Photo coupler isolation for IN/OUT, maximum 4000VAC
  • 5. Built-in dv/dt protection
  • 6. 2-Level signal inputs, low current input
Order Code:
  • SY Order code SY-1-2-3
  • 1:Rated voltage
       2----AC 50-280V
       4---- AC 100-500V
  • 2:Rated current
       025----Max.25A
       040----Max.40A
  • 3:Input type
       D---- 4~30VDC input
       A---- 70~280VAC input

Name:
  • SB Slim Strong Relay
Features:
  • 1. Selection of output modes: 1. Phase angle control 2. Phase angle soft start & zero cross working (world's leading excellent function}.
  • 2. Micro-computer digital control with extra high resolution.
  • 3. Built-in overheat indicator & protection of cooling fin
  • 4. 2 Thyristor design, high voltage-resistant and high current-resistant
  • 5. Full heat radiating capability allowing 100'/. continuous output
  • 6. Built-in fuse protection
  • 7. Super slim figure, saving
  • body's space
  • 8. Secure CE wiring terminal, no need of ring terminals, easy for wiring
  • 9. Selection of 6 input signals: DC4-20mA, 0-20mA, 1-5V, 0-5V, 2-10V, 0-10V
Order Code:
  • Heatsoft order code 1-2-3
  • 1:Input signal
       SB
  • 2:Rated voltage
       1----AC 75-135V
       2----AC 180-260V
       3----AC 260-440V
       4----AC 330-530V
  • 3:Rated current
       016----16A
       025----25A
       033----33A
       044----44A
  •    058----58A

Name:
  • SV Slim Strong Relay
Features:
  • 1. 2 Thyristor design, high voltage-resistant and high current-resistant
  • 2. Full heat radiating capability allowing 100'/. continuous output
  • 3. Built-in fuse protection
  • 4. Super slim figure, saving body's space
  • 5. Secure CE wiring terminal, no need of ring terminals, easy for wiring
  • 6. 2-Level of signal inputs, low input current.
  • 7. Extremely convenient, to combine with 2 or 3 sets together to use a 3-phase power.
Order Code:
  • Slim tpye order code 1-2-3
  • 1:Input signal
       SV----DC4-8V/8-30V
       SW----AC70-140V/140-280V
  • 2:Rated voltage
       2----AC 24-280Vrms
       4---- AC 48-560Vrms
  • 3:Rated current
       016----16A
       025----25A
       033----33A
       044----44A
       058----58A

Name:
  • ARV38 Solid State Relay
Features:
  • 1. All solid state, optically coupled for 2500 VAC isolation between input and output circuit.
  • 2. Load current of10、15、25、40 amperes.
  • 3. Able to be driven by IC such as TTL & CMOS.
  • 4. Internally mounted snobbier circuit protection for huge current application.
  • 5. A LED can indicate the operating of devices.
  • 6. Long services life and high reliability.
Specifications:
  • 1、 Input resistor 100KΩ
  • 2、 Control power range 7%~95%
  • 3、 Voltage range 100~240Vrms
  • 4、 Maximum current 15A
  • 5、 Maximum 1-cycle surge (50Hz) A/AAS
  • 6、 Maximum off-state leakage 8mArms
  • 7、 Maximum on-state voltage drop (T=25℃)1.6vdc
  • 8、 Thermal resistance
  • 9、 Dimension 57X43.6X23.3mm
  • 10、 In/output to baseplate isolation voltage 2500Vrms
  • 11、 Work temperature -20~80℃
  • 12、 Storage temperature -40~100℃
Order Code:
  • ARV3810
  • ARV3815
  • ARD3825
  • ARD3840

Name:
  • ARD48 Solid State Relay
Features:
  • 1. All solid state, optically coupled for 2500 VAC isolation between input and output circuit.
  • 2. Load current of 25、40、65、75 amperes.
  • 3. Able to be driven by IC such as TTL & CMOS.
  • 4. Internally mounted snobbier circuit protection for huge current application.
  • 5. A LED can indicate the operating of devices.
  • 6. Long services life and high reliability.
Specifications:
  • 1、 Control voltage range 4~32VDC
  • 2、 Maximum current 15mA(at Vmax)
  • 3、 Maximum pickup voltage 4Vdc
  • 4、 Minimum dropout voltage Vdc
  • 5、 Voltage range 70~240Vrms
  • 6、 Peak voltage 600Vdc
  • 7、 Maximum current A
  • 8、 Maximum 1-cycle surge (50Hz) A/AAS
  • 9、 Maximum off-state leakage mA rms
  • 10、 Maximum on-state voltage drop 1.6vdc
  • 11、 Thermal resistance
  • 12、 Dimension 57X43.6X23.3mm
  • 13、 Response time 1/2cycle+1msec
  • 14、 Input to output dielectric strength >100MΩ
  • 15、 Input to output isolation voltage 2500Vrms
  • 16、 Input /output to baseplate isolation voltage 2500Vrms
  • 17、 Work temperature -20~80℃
  • 18、 Storage temperature -40~100℃
Order Code:
  • ARD4825
  • ARD4840
  • ARD4850
  • ARD4875

Name:
  • ARD24 Solid State Relay
Features:
  • 1. All solid state, optically coupled for 2500 VAC isolation between input and output circuit.
  • 2. Load current of 15、25、40、65、75 amperes.
  • 3. Able to be driven by IC such as TTL & CMOS.
  • 4. Internally mounted snobbier circuit protection for huge current application.
  • 5. A LED can indicate the operating of devices.
  • 6. Long services life and high reliability.
Specifications:
  • 1、 Control voltage range 4~32VDC
  • 2、 Maximum current 15mA(at Vmax)
  • 3、 Maximum pickup voltage 4Vdc
  • 4、 Minimum dropout voltage Vdc
  • 5、 Voltage range 70~240Vrms
  • 6、 Peak voltage 600Vdc
  • 7、 Maximum current A
  • 8、 Maximum 1-cycle surge (50Hz) A/AAS
  • 9、 Maximum off-state leakage mA rms
  • 10、 Maximum on-state voltage drop 1.6vdc
  • 11、 Thermal resistance
  • 12、 Dimension 57X43.6X23.3mm
  • 13、 Response time 1/2cycle+1msec
  • 14、 Input to output dielectric strength >100MΩ
  • 15、 Input to output isolation voltage 2500Vrms
  • 16、 Input /output to baseplate isolation voltage 2500Vrms
  • 17、 Work temperature -20~80℃
  • 18、 Storage temperature -40~100℃
Order Code:
  • ARD2410
  • ARD2415
  • ARD2425
  • ARD2440
  • ARD2450
  • ARD2475

 
Name:
  • Air Cooled Ceramic Band Heaters
Features:
  • *To heat and cool the barrel.
  • * Low maintenance.
  • * Easy replacement.
  • * Improves quality of finished products.
  • * Space saving.
  • * Increases productivity.
  • Available with various diameter, length, voltage, wattage and configurations

Name:
  • Insulation Plus Ceramic Band Heaters
Features:
  • * Saving in energy up to 30﹪
  • * Reduced wattage of heater.
  • * More uniform heating.
  • * Less down time increases productivity.
  • * Reduced preheating time of machine.
  • * Heater cost is recovered in shorter time.
  • * Cool working atmosphere for operator.
Specifications:
  • 1、 Maximum Watt Density:8 watts / sq. cm.
  • 2、 Voltage:220VAC~480VAC
  • 3、 Maximum Temperature:800° C
  • 4、 Overall Thickness:40mm
  • 5、 Minimum Dia.:50mm
  • 6、 Minimum Width:100mm
  • 7、 Std. gap between edges:5~10mm

Name:
  • Ceramic Band Heaters
Features:
  • * Thermal insulation.
  • * Conserves energy.
  • * Minimum heat loss.
  • * Easy installation.
  • * Uniform temperature.
  • * Better heater life.
  • * Can be manufactured to your specification.
  • * Various types of construction & terminations.
Specifications:
  • 1、 Maximum Watt Density:8 watts / sq. cm.
  • 2、 Voltage:220VAC~480VAC
  • 3、 Maximum Temperature:800° C
  • 4、 Overall Thickness:15mm
  • 5、 Minimum Dia.:38mm
  • 6、 Minimum Width:25mm
  • 7、 Std. gap between edges:5~10mm

Name:
  • LT Displacement Transducers
Features:
  • • 50 to 900 mm stroke.
  • • Mechanical linkage using M6 thread
  • • Independent linearity ± 0,05%
  • • Repetibility 0,01 mm.
  • • Infinite resolution
  • • No variation of electrical signal outside theoretical electrical stroke
  • • Displacement speed up to 5 m/s (optional 10m/s)
  • • Working temperature: -30...+100°C
  • • Life duration: > 25x10M meters or > 100x10M operations
  • • Grade of protection IP60 (optional IP65/67)
Specifications:
  • Displacement force ≤ 2N Version IP60 ≤ 10N Version IP65
  • Vibrations: 5...2000Hz, Amax =0,75 mm amax. = 20 g
  • Shock: 50 g, 11ms.
  • Operative acceleration = 200 m/s2 max (20g)
  • Tolerance on resistance: ± 20%
  • Recommended cursor < 0,1 μA current Maximum cursor current < 10mA
  • Maximum applicable voltage < 60V
  • Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Dissipation = 3W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 1,5ppm/°C
  • Working temperature: -30...+100°C
  • Storage temperature: -50...+120°C
  • Control rod material Stainless steel AISI 303

Name:
  • PK Displacement Transducers
Features:
  • • 100 to 2000 mm stroke.
  • • Mechanical linkage using M5 thread
  • • Independent linearity ± 0,05%
  • • Repetibility 0,01 mm.
  • • Infinite resolution
  • • No variation of electrical signal outside theoretical electrical stroke
  • • Displacement speed up to 5 m/s (optional 10m/s)
  • • Working temperature: -30...+100°C
  • • Life duration: > 25x10M meters or > 100x10M operations
  • • Grade of protection IP40
Specifications:
  • Displacement force ≤ 2N Version IP60 ≤ 10N Version IP65
  • Vibrations: 5...2000Hz, Amax =0,75 mm amax. = 20 g
  • Shock: 50 g, 11ms.
  • Operative acceleration = 200 m/s2 max (20g)
  • Tolerance on resistance: ± 20%
  • Recommended cursor < 0,1 μA current
  • Maximum cursor current < 10mA
  • Maximum applicable voltage < 60V Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Dissipation = 3W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 1,5ppm/°C
  • Working temperature: -30...+100°C
  • Storage temperature: -50...+120°C
  • Control rod material Stainless steel AISI 303

Name:
  • PA1 Displacement Transducers
Features:
  • • 25 to 150 mm stroke.
  • • Mechanical linkage using M4 thread
  • • Independent linearity ± 0,05%
  • • Repetibility 0,01 mm.
  • • Infinite resolution
  • • No variation of electrical
  • signal outside theoretical electrical stroke
  • • Displacement speed up to 5 m/s (optional 10m/s)
  • • Working temperature: -30...+100°C
  • • Life duration: > 25x10M meters or > 100x10M operations
  • • Grade of protection IP40
Specifications:
  • Displacement force ≤ 1.2N
  • Vibrations: 5...2000Hz, Amax =0,75 mm amax. = 20 g
  • Shock: 50 g, 11ms.
  • Tolerance on resistance: ± 20%
  • Recommended cursor < 0,1 μA current
  • Maximum cursor current < 10mA
  • Maximum applicable voltage < 60V
  • Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Dissipation < 3.6W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 1,5ppm/°C
  • Working temperature: -30...+100°C
  • Storage temperature: -50...+120°C
  • Control rod material Stainless steel AISI 303

Name:
  • PY1 Displacement Transducers
Features:
  • • 25 to 150 mm stroke.
  • • Mechanical linkage using M4 thread
  • • Independent linearity ± 0,05%
  • • Repetibility 0,01 mm.
  • • Infinite resolution
  • • No variation of electrical signal outside theoretical electrical stroke
  • • Displacement speed up to 10 m/s
  • • Working temperature: -30...+100°C
  • • Life duration: > 25x10M meters or > 100x10M operations
  • • Grade of protection IP40
Specifications:
  • Displacement force ≤ 0.3N
  • Vibrations: 5...2000Hz, Amax =0,75 mm amax. = 20 g
  • Shock: 50 g, 11ms.
  • Tolerance on resistance: ± 20%
  • Recommended cursor < 0,1 μA current
  • Maximum cursor current < 10mA
  • Maximum applicable voltage < 60V
  • Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Dissipation < 3.6W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 1,5ppm/°C
  • Working temperature: -30...+100°C
  • Storage temperature: 
  • -50...+120°C
  • Control rod material Stainless steel AISI 303

Name:
  • PY2 Displacement Transducers
Features:
  • • 10 to 100 mm stroke.
  • • Mechanical linkage using M2.5 thread
  • • Independent linearity ± 0,1%
  • • Repetibility 0,01 mm.
  • • Infinite resolution
  • • No variation of electrical signal outside theoretical electrical stroke
  • • Displacement speed up to 10 m/s
  • • Working temperature: -30...+100°C
  • • Life duration: > 25x10M meters or > 100x10M operations
  • • Grade of protection IP40
Specifications:
Displacement force ≤ 4N
Vibrations: 5...2000Hz, Amax =0,75 mm amax. = 20 g
  • Shock: 50 g, 11ms.
  • Tolerance on resistance: ± 20%
  • Recommended cursor < 0,1 μA current
  • Maximum cursor current < 10mA
  • Maximum applicable voltage < 60V
  • Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Dissipation < 2.4W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 1,5ppm/°C
  • Working temperature: -30...+100°C
  • Storage temperature: -50...+120°C
  • Control rod material Stainless steel AISI 303

Name:
  • PY3 Displacement Transducers
Features:
  • • 10 to 50 mm stroke.
  • • Mechanical linkage using M2.5 thread
  • • Independent linearity ± 0,1%.
  • • Infinite resolution
  • • No variation of electrical signal outside theoretical electrical stroke
  • • Displacement speed up to 10 m/s
  • • Working temperature: -30...+100°C
  • • Life duration: > 25x10M meters or > 100x10M operations
  • • Grade of protection IP40
Specifications:
  • Displacement force ≤ 4N
  • Vibrations: 5...2000Hz, Amax =0,75 mm amax. = 20 g
  • Shock: 50 g, 11ms.
  • Tolerance on resistance: ± 20%
  • Recommended cursor < 0,1 μA current
  •  Maximum cursor current < 10mA
  • Maximum applicable voltage < 60V
  • Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Dissipation < 1.2W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 1,5ppm/°C
  • Working temperature: -30...+100°C
  • Storage temperature: -50...+120°C

Control rod material Stainless steel AISI 303

Name:
  • PZ12 Displacement Transducers
Features:
  • • 25 to 250 mm stroke.
  • • Mechanical fixing using brackets, selfaligning ball-joints or flange
  • • Infinite resolution
  • • No variation of electrical signal outside theoretical electrical stroke
  • • Displacement speed up to 10 m/s
  • • Working temperature: -30...+100°C
  • • Life duration: > 25x10M meters or > 100x10M operations
  • • Grade of protection IP60
Specifications:
  • Displacement force ≤ 0.5N
  • Vibrations: 5...2000Hz, Amax =0,75 mm amax. = 20 g
  • Shock: 50 g, 11ms.
  • Tolerance on resistance: ± 20%
  • Recommended cursor < 0,1 μA current
  • Maximum cursor current < 10mA
  • Maximum applicable voltage < 60V
  • Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Dissipation < 3W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 1,5ppm/°C
  • Working temperature: -30...+100°C
  • Storage temperature: -50...+120°C
  • Control rod material Stainless steel AISI 303

Name:
  • PZ34 Displacement Transducers
Features:
  • • 25 to 300 mm stroke.
  • • Mechanical fixing using brackets, selfaligning ball-joints or flange
  • • Infinite resolution
  • • No variation of electrical signal outside theoretical electrical stroke
  • • Displacement speed up to 10 m/s
  • • Working temperature: -30...+100°C
  • • Life duration: > 25x10M meters or > 100x10M operations
  • • Grade of protection IP60
Specifications:
  • Displacement force ≤ 0.5N
  • Vibrations: 5...2000Hz, Amax =0,75 mm amax. = 20 g
  • Shock: 50 g, 11ms.
  • Tolerance on resistance: ± 20%
  • Recommended cursor < 0,1 μA current
  • Maximum cursor current < 10mA
  • Maximum applicable voltage < 60V
  • Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Dissipation < 3W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 1,5ppm/°C
  • Working temperature: -30...+100°C
  • Storage temperature: -50...+120°C
  • Control rod material Stainless steel AISI 303

Name:
  • PC Displacement Transducers
Features:
  • • 50 to 750 mm stroke.
  • • Independent linearity ± 0,05%
  • • Repetibility 0,01 mm.
  • • Infinite resolution
  • • No variation of electrical signal outside theoretical electrical stroke
  • • Displacement speed up to 5 m/s
  • • Working temperature: -30...+100°C
  • • Life duration: > 25x10M meters or > 100x10M operations
  • • Grade of protection IP60 (optional IP65/67)
Specifications:
  • Displacement force ≤ 10N
  • Vibrations: 5...2000Hz, Amax =0,75 mm amax. = 20 g
  • Shock: 50 g, 11ms.
  • Tolerance on resistance: ± 20%
  • Recommended cursor < 0,1 μA current
  • Maximum cursor current < 10mA
  • Maximum applicable voltage < 60V
  • Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Dissipation = 3W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 1,5ppm/°C
  • Working temperature: -30...+100°C
  • Storage temperature: -50...+120°C
  • Control rod material Stainless steel AISI 303

Name:
  • PMA12 Displacement Transducers with Magnetic pulling
Features:
  • • 50 to 1000 mm stroke.
  • • Cursor magnetic pulling
  • • Mechanical anchoring and self-aligning pulling on 2 ball joints
  • • Max angle of movement up to ± 26°
  • • Independent linearity ± 0,05%
  • • Repetibility < 0,08 mm
  • • Hysteresis < 0,25 mm
  • • Tracking error
  • • Infinite resolution
  • • No variation of electrical
  • signal outside theoretical electrical stroke
  • • Displacement speed up to 5 m/s (optional 10m/s)
  • • Working temperature: -30...+100°C
  • • Life duration: > 25x10M meters or > 100x10M operations
  • • Grade of protection IP67
Specifications:
  • Cursor dragging force ≤ 0.5N
  • Vibrations: 10...2000Hz, amax. = 12 g
  • Shock: 50 g, 11ms.
  • Tolerance on resistance: ± 20%
  • Recommended cursor < 0,1 μA current
  • Maximum cursor current < 10mA
  • Maximum applicable voltage < 60V
  • Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Dissipation = 3W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 1,5ppm/°C
  • Working temperature: -30...+100°C
  • Storage temperature: -50...+120°C

Name:
  • PME12 Displacement Transducers with Magnetic drag
Features:
  • • 50 to 1000 mm stroke.
  • • Cursor magnetic drag
  • • Independent linearity ± 0,05%
  • • Repetibility < 0,08 mm
  • • Hysteresis < 0,25 mm
  • • Infinite resolution
  • • No variation of electrical signal outside theoretical electrical stroke
  • • Displacement speed up to 5 m/s (optional 10m/s)
  • • Working temperature: -30...+100°C
  • • Life duration: > 25x10M meters or > 100x10M operations
  • • Grade of protection IP67 (20bar)
Specifications:
  • Cursor dragging force ≤ 0.5N
  • Vibrations: 10...2000Hz, amax. = 12 g
  • Shock: 50 g, 11ms.
  • Tolerance on resistance: ± 20%
  • Recommended cursor < 0,1 μA current
  • Maximum cursor current < 10mA
  • Maximum applicable voltage < 60V
  • Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Dissipation = 3W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 5ppm/°C
  • Working temperature: -30...+100°C
  • Storage temperature: -50...+120°C

Name:
  • PMI12 Displacement Transducers with Magnetic drag
Features:
  • Features
  • • 50 to 1000 mm stroke.
  • • Cursor magnetic drag
  • • Independent linearity ± 0,05%
  • • Repetibility < 0,08 mm
  • • Hysteresis < 0,25 mm
  • • Tracking error
  • • Infinite resolution
  • • No variation of electrical signal outside theoretical electrical stroke
  • • Displacement speed up to 5 m/s (optional 10m/s)
  • • Working temperature: -30...+100°C
  • • Life duration: > 25x10M meters or > 100x10M operations
  • • Grade of protection IP68 (250bar)
Specifications:
  • Cursor dragging force ≤ 0.5N
  • Vibrations: 10...2000Hz, amax. = 12 g
  • Shock: 50 g, 11ms.
  • Tolerance on resistance: ±
  • 20%
  • Recommended cursor < 0,1 μA current
  • Maximum cursor current < 10mA
  • Maximum applicable voltage < 60V
  • Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Dissipation = 3W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 1,5ppm/°C
  • Working temperature: -30...+100°C
  • Storage temperature: -50...+120°C
  • Stem & nipple material Stainless steel AISI 316

Name:
  • PS Rotational position transducers
Features:
  • • Servo mounting
  • • Independent linearity ± 0,05%
  • • Repetibility 0,01 C.E.T.
  • • Rotation speed < 600 rpm
  • • Infinite resolution
  • • Working temperature: -55...+100°C
  • • Life duration: > 100x10M operations at 10 rpm
Specifications:
  • Hysteresis < 15” of arc
  • Torque < 0.2Ncm
  • Vibrations: 5...2000Hz, Amax =0,75 mm amax. = 20 g
  • Shock: 50 g, 11ms.
  • Tolerance on resistance: ± 20%
  • Recommended cursor < 0,1 μA current
  • Maximum cursor current < 10mA
  • Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Dissipation = 3W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 1,5ppm/°C
  • Working temperature: -55...+100°C
  • Storage temperature: -55...+125°C

Name:
  • PR65 Rotational position transducers
Features:
  • • Sealed industrial version
  • • Independent linearity ± 0,05%
  • • Repetibility 0,01 C.E.T.
  • • Infinite resolution
  • • Working temperature: -55...+100°C
  • • Life duration: > 100x10M operations at 10 rpm
  • • Grade of protection IP65
Specifications:
  • Hysteresis < 15” of arc
  • Vibrations: 5...2000Hz, Amax =0,75 mm amax. = 20 g
  • Shock: 50 g, 11ms.
  • Tolerance on resistance: ± 20%
  • Recommended cursor < 0,1 μA current
  • Maximum cursor current < 10mA
  • Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Dissipation = 1.25W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 1,5ppm/°C
  • Working temperature: -55...+100°C
  • Storage temperature: -55...+125°C

Name:
  • IC Displacement Transducers for mounting inside hydraulic actuators
Features:
  • Features
  • • 100 to 550 mm stroke.
  • • Mechanical fixing by internal or external flange
  • • Independent linearity ± 0,1%
  • • Repetibility < 0,01 mm
  • • Hysteresis < 0,25 mm
  • • Infinite resolution
  • • No variation of electrical
  • signal outside theoretical electrical stroke
  • • Displacement speed up to 1.5 m/s
  • • Working temperature: -30...+100°C
  • • Life duration: > 25x10M meters or > 100x10M operations
Specifications:
  • Displacement force < 1N
  • Vibrations: 5...2000Hz, amax. = 20 g
  • Shock: 50 g, 11ms.
  • Tolerance on resistance: ± 20%
  • Recommended cursor < 0,1 μA current
  • Maximum cursor current < 10mA
  • Maximum applicable voltage < 60V
  • Electrical isolation >100MΩ at 500V=, 1bar, 2s
  • Dielectric strength < 100 μA at 500V~, 50Hz, 2s, 1bar
  • Actual Temperature Coefficient < 1,5ppm/°C
  • Working temperature: -30...+100°C
  • Storage temperature: -50...+120°C

Name:
  • M30 Melt pressure transmitters
Features:
  • • Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • • Accuracy: <±0.25% FSO (H); <±0.5% FSO (M)
  • • Fluid-filled system for temperature stability
  • • Mercury filling volume: M30 (30mm3), M31-M32-M33 (40mm3)
  • • 1/2-20UNF, M18x1.5 standard threads; other types available on request
  • • Standard diaphragm is 15-5 PH stainless steel with GTP coating
  • • 17-7 PH corrugated diaphragm with GTP coating for ranges below 100bar-1500psi
Specifications:
  • Accuracy up to ±0.25%FSO
  • Resolution: Infinite
  • Measurement range = 0..35 to 0..2000bar / 0..500 to 0..30000psi
  • Maximum overpressure = 2 x FS (1.5 x FS above1000bar)
  • Supply voltage = 6..12Vdc (10Vdc typical)
  • Strain gage bridge resistance = 350 Ohm (550 below 100bar) Isolation resistance (at 50Vdc) = >1000 MOhm
  • Zero balance = ±0.5% FSO
  • Calibration signal = 80% FSO
  • Compensated temperature range = 0...+100°C / 32...212°F
  • Maximum temperature range = -30...+120°C / -22...250°F
  • Thermal drift in compensated range < 0.02% FSO/°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature = 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”
  • Protection degree (with 6-pin mating connector): IP65

Name:
  • M31 Melt pressure transmitters
Features:
  • • Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • • Accuracy: <±0.25% FSO (H); <±0.5% FSO (M)
  • • Fluid-filled system for temperature stability
  • • Mercury filling volume: M30 (30mm3), M31-M32-M33 (40mm3)
  • • 1/2-20UNF, M18x1.5 standard threads; other types available on request
  • • Standard diaphragm is 15-5 PH stainless steel with GTP coating
  • • 17-7 PH corrugated diaphragm with GTP coating for ranges below 100bar-1500psi
Specifications:
  • Accuracy up to ±0.25%FSO
  • Resolution: Infinite
  • Measurement range = 0..35 to 0..2000bar / 0..500 to 0..30000psi
  • Maximum overpressure = 2 x FS (1.5 x FS above1000bar)
  • Supply voltage = 6..12Vdc (10Vdc typical)
  • Strain gage bridge resistance = 350 Ohm (550 below 100bar) Isolation resistance (at 50Vdc) = >1000 MOhm
  • Zero balance = ±0.5% FSO
  • Calibration signal = 80% FSO
  • Compensated temperature range = 0...+100°C / 32...212°F
  • Maximum temperature range = -30...+120°C / -22...250°F
  • Thermal drift in compensated range < 0.02% FSO/°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature = 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”
  • Protection degree (with 6-pin mating connector): IP65

Name:
  • M32 Melt pressure transmitters
Features:
  • • Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • • Accuracy: <±0.25% FSO (H); <±0.5% FSO (M)
  • • Fluid-filled system for temperature stability
  • • Mercury filling volume: M30 (30mm3), M31-M32-M33 (40mm3)
  • • 1/2-20UNF, M18x1.5 standard threads; other types available on request
  • • Standard diaphragm is 15-5 PH stainless steel with GTP coating
  • • 17-7 PH corrugated diaphragm with GTP coating for ranges below 100bar-1500psi
Specifications:
  • Accuracy up to ±0.25%FSO
  • Resolution: Infinite
  • Measurement range = 0..35 to 0..2000bar / 0..500 to 0..30000psi
  • Maximum overpressure = 2 x FS (1.5 x FS above1000bar)
  • Supply voltage = 6..12Vdc (10Vdc typical)
  • Strain gage bridge resistance = 350 Ohm (550 below 100bar) Isolation resistance (at 50Vdc) = >1000 MOhm
  • Zero balance = ±0.5% FSO
  • Calibration signal = 80% FSO
  • Compensated temperature range = 0...+100°C / 32...212°F
  • Maximum temperature range = -30...+120°C / -22...250°F
  • Thermal drift in compensated range < 0.02% FSO/°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature = 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”
  • Protection degree (with 6-pin mating connector): IP65

Name:
  • ME0 Melt pressure transmitters
Features:
  • • Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • • Accuracy: <±0.25% FSO (H); <±0.5% FSO (M)
  • • Fluid-filled system for temperature stability
  • • Mercury filling volume: M30 (30mm3), M31-M32-M33 (40mm3)
  • • 1/2-20UNF, M18x1.5 standard threads; other types available on request
  • • Standard diaphragm is 15-5 PH stainless steel with GTP coating
  • • 17-7 PH corrugated diaphragm with GTP coating for ranges below 100bar-1500psi
Specifications:
  • Accuracy up to ±0.25%FSO
  • Resolution: Infinite
  • Measurement range = 0..35 to 0..2000bar / 0..500 to 0..30000psi
  • Maximum overpressure = 2 x FS (1.5 x FS above1000bar)
  • Supply voltage = 10..30Vdc
  • Maximum current absorption = 32mA
  • Output signal full scale = 20 mA
  • Isolation resistance (at 50Vdc) = >1000 MOhm
  • Zero balance = 4mA Calibration signal = 80% FSO
  • Compensated temperature range = 0...+85°C
  • Operating temperature range = -30...+105°C
  • Thermal drift in compensated range < 0.02% FSO/°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature = 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”
  • Protection degree (with 6-pin mating connector): IP65

Name:
  • ME1 Melt pressure transmitters
Features:
  • • Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • • Accuracy: <±0.25% FSO (H); <±0.5% FSO (M)
  • • Fluid-filled system for temperature stability
  • • Mercury filling volume: M30 (30mm3), M31-M32-M33 (40mm3)
  • • 1/2-20UNF, M18x1.5 standard threads; other types available on request
  • • Standard diaphragm is 15-5 PH stainless steel with GTP coating
  • • 17-7 PH corrugated diaphragm with GTP coating for ranges below 100bar-1500psi
Specifications:
  • Accuracy up to ±0.25%FSO
  • Resolution: Infinite
  • Measurement range = 0..35 to 0..2000bar / 0..500 to 0..30000psi
  • Maximum overpressure = 2 x FS (1.5 x FS above1000bar)
  • Supply voltage = 10..30Vdc
  • Maximum current absorption = 32mA
  • Output signal full scale = 20 mA
  • Isolation resistance (at 50Vdc) = >1000 MOhm
  • Zero balance = 4mA Calibration signal = 80% FSO
  • Compensated temperature range = 0...+85°C
  • Operating temperature range = -30...+105°C
  • Thermal drift in compensated range < 0.02% FSO/°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature = 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”
  • Protection degree (with 6-pin mating connector): IP65

Name:
  • ME2 Melt pressure transmitters
Features:
  • • Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • • Accuracy: <±0.25% FSO (H); <±0.5% FSO (M)
  • • Fluid-filled system for temperature stability
  • • Mercury filling volume: M30 (30mm3), M31-M32-M33 (40mm3)
  • • 1/2-20UNF, M18x1.5 standard threads; other types available on request
  • • Standard diaphragm is 15-5 PH stainless steel with GTP coating
  • • 17-7 PH corrugated diaphragm with GTP coating for ranges below 100bar-1500psi
Specifications:
  • Accuracy up to ±0.25%FSO
  • Resolution: Infinite
  • Measurement range = 0..35 to 0..2000bar / 0..500 to 0..30000psi
  • Maximum overpressure = 2 x FS (1.5 x FS above1000bar)
  • Supply voltage = 10..30Vdc
  • Maximum current absorption = 32mA
  • Output signal full scale = 20 mA
  • Isolation resistance (at 50Vdc) = >1000 MOhm
  • Zero balance = 4mA Calibration signal = 80% FSO
  • Compensated temperature range = 0...+85°C
  • Operating temperature range = -30...+105°C
  • Thermal drift in compensated range < 0.02% FSO/°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature = 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”
  • Protection degree (with 6-pin mating connector): IP65

Name:
  • MN0 Melt pressure transmitters
Features:
  • • Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • • Accuracy: <±0.25% FSO (H); <±0.5% FSO (M)
  • • Fluid-filled system for temperature stability
  • • Mercury filling volume: M30 (30mm3), M31-M32-M33 (40mm3)
  • • Drift auto compensation function (SP version)
  • • 1/2-20UNF, M18x1.5 standard threads; other types available on request
  • • Standard diaphragm is 15-5 PH stainless steel with GTP coating
  • • 17-7 PH corrugated diaphragm with GTP coating for ranges below 100bar
Specifications:
  • Accuracy up to ±0.25%FSO
  • Resolution: Infinite
  • Measurement range = 0..35 to 0..2000bar / 0..500 to 0..30000psi
  • Maximum overpressure = 2 x FS (1.5 x FS above1000bar)
  • Supply voltage = 10..30Vdc
  • Maximum current absorption = 25mA
  • Isolation resistance (at 50Vdc) = >1000 MOhm
  • Zero balance = 0~0.1Vdc
  • Volt. Spike protection > 2KV Response time (0~90% FSO) < 1msec
  • Calibration signal = 80% FSO
  • Compensated temperature range = 0...+85°C
  • Operating temperature range = -30...+105°C
  • Thermal drift in compensated range < 0.02% FSO/°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature < 0.003 bar/°C
  • Thermocouple (model M32) STD : type “J”
  • Protection degree (with 6-pin mating connector): IP65

Name:
  • MN2 Melt pressure transmitters
Features:
  • • Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  • • Accuracy: <±0.25% FSO (H); <±0.5% FSO (M)
  • • Fluid-filled system for temperature stability
  • • Mercury filling volume: M30 (30mm3), M31-M32-M33 (40mm3)
  • • Drift auto compensation function (SP version)
  • • 1/2-20UNF, M18x1.5 standard threads; other types available on request
  • • Standard diaphragm is 15-5 PH stainless steel with GTP coating
  • • 17-7 PH corrugated diaphragm with GTP coating for ranges below 100bar
Specifications:
  • Accuracy up to ±0.25%FSO
  • Resolution: Infinite
  • Measurement range = 0..35 to 0..2000bar / 0..500 to 0..30000psi
  • Maximum overpressure = 2 x FS (1.5 x FS above1000bar)
  • Supply voltage = 10..30Vdc
  • Maximum current absorption = 25mA
  • Isolation resistance (at 50Vdc) = >1000 MOhm
  • Zero balance = 0~0.1Vdc
  • Volt. Spike protection > 2KV Response time (0~90% FSO) < 1msec
  • Calibration signal = 80% FSO
  • Compensated temperature range = 0...+85°C
  • Operating temperature range = -30...+105°C
  • Thermal drift in compensated range < 0.02% FSO/°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature < 0.003 bar/°C
  • Thermocouple (model M32) STD : type “J”
  • Protection degree (with 6-pin mating connector): IP65

Name:
  • M51 Mechanical melt pressure gauge
Features:
  • • Economically priced
  • • 1.5 times overload capacity
  • • Easy-to-read display
  • • 1/2-20 UNF thread standard, M18 x 1.5 also available
  • • 15-5 PH stainless steel diaphragm with Armoloy coating standard
  • • No power required
Specifications:
  • Accuracy up to ±0.1%FSO
  • Measurement range = 0..350 to 0..700bar / 0..5000 to 0..10000psi
  • Maximum overpressure = 1.5 x FS
  • Housing temperature range = -30...+85°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature < 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”
  • Housing temperature range = -30...+85°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature < 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”

Name:
  • M50 Mechanical melt pressure gauge
Features:
  • • Economically priced
  • • 1.5 times overload capacity
  • • Easy-to-read display
  • • 1/2-20 UNF thread standard, M18 x 1.5 also available
  • • 15-5 PH stainless steel diaphragm with Armoloy coating standard
  • • No power required
Specifications:
  • Accuracy up to ±0.1%FSO
  • Measurement range = 0..350 to 0..700bar / 0..5000 to 0..10000psi
  • Maximum overpressure = 1.5 x FS
  • Housing temperature range = -30...+85°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature < 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”
  • Housing temperature range = -30...+85°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature < 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”

Name:
  • M52 Mechanical melt pressure gauge
Features:
  • • Economically priced
  • • 1.5 times overload capacity
  • • Easy-to-read display
  • • 1/2-20 UNF thread standard, M18 x 1.5 also available
  • • 15-5 PH stainless steel diaphragm with Armoloy coating standard
  • • No power required
Specifications:
  • Accuracy up to ±0.1%FSO
  • Measurement range = 0..350 to 0..700bar / 0..5000 to 0..10000psi
  • Maximum overpressure = 1.5 x FS
  • Housing temperature range = -30...+85°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature < 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”
  • Housing temperature range = -30...+85°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature < 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”

 Name:
  • M60 Digital melt pressure gauge
Features:
  • • Better than ±0.50% accuracy
  • • Economically priced
  • • 2 times overload capacity
  • • 1/2-20 UNF thread standard, M18x1.5 also available
  • • One alarm standard
  • • 4-20 mA retransmission standard
  • • 15-5 stainless steel diaphragm with Armoloy coating standard
  • • 17-7 PH corrugated diaphragm with TiN coating
Specifications:
  • Accuracy up to ±0.50%FSO
  • Measurement range = 0..350 to 0..1000bar / 0..5000 to 0..15000psi
  • Maximum overpressure = 2 x FS
  • Supply voltage = 115 or 230 Vac
  • Retransmission of Pressure Value = 4-20mA
  • Maximum housing temperature < 55°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature < 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”
  • Alarm: C relay 5A

 Name:
  • M61 Digital melt pressure gauge
Features:
  • • Better than ±0.50% accuracy
  • • Economically priced
  • • 2 times overload capacity
  • • 1/2-20 UNF thread standard, M18x1.5 also available
  • • One alarm standard
  • • 4-20 mA retransmission standard
  • • 15-5 stainless steel diaphragm with Armoloy coating standard
  • • 17-7 PH corrugated diaphragm with TiN coating
Specifications:
  • Accuracy up to ±0.50%FSO
  • Measurement range = 0..350 to 0..1000bar / 0..5000 to 0..15000psi
  • Maximum overpressure = 2 x FS
  • Supply voltage = 115 or 230 Vac
  • Retransmission of Pressure Value = 4-20mA
  • Maximum housing temperature < 55°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature < 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”
  • Alarm: C relay 5A

 Name:
  • M62 Digital melt pressure gauge
Features:
  • • Better than ±0.50% accuracy
  • • Economically priced
  • • 2 times overload capacity
  • • 1/2-20 UNF thread standard, M18x1.5 also available
  • • One alarm standard
  • • 4-20 mA retransmission standard
  • • 15-5 stainless steel diaphragm with Armoloy coating standard
  • • 17-7 PH corrugated diaphragm with TiN coating
Specifications:
  • Accuracy up to ±0.50%FSO
  • Measurement range = 0..350 to 0..1000bar / 0..5000 to 0..15000psi
  • Maximum overpressure = 2 x FS
  • Supply voltage = 115 or 230 Vac
  • Retransmission of Pressure Value = 4-20mA
  • Maximum housing temperature < 55°C
  • Diaphragm maximum temperature < 400°C / 750°F
  • Zero drift due to change in process temperature < 0.02 bar/°C
  • Thermocouple (model M32) STD : type “J”
  • Alarm: C relay 5A

Name:
  • MK2 Contactless Magnetostrictive Displacement Transducers
Features:
  • • 100 to 4000 mm stroke.
  • • Possibility of one or two cursors simultaneously
  • • Independent linearity ± 0,02%
  • • Repetibility error < 0,001% of C.E..
  • • Local intelligence
  • • Speed solution up to 0.01mm/s
  • • Linearity error < 0.01%
  • • Resistance to vibrations
  • • Grade of protection IP67
  • • Overvoltage and overcurrent protection
Specifications:
  • Measurement taken: linear position and speed
  • Vibrations: 10...2000Hz, amax. = 12 g
  • Shock: 100g, 11ms.
  • Sliding cursor drag force <1N
  • Shift speed < 10m/s
  • Max acceleration < 100 m/s2 shift
  • Rated power supply = 24Vdc ± 20%
  • Resolution = 5μm (2μm on request)
  • Maximum power ripple = 1Vpp
  • Maximum input < 100mA
  • Output signal: CAN bus
  • Electrical isolation = 500V
  • Dissipation = 3W (40°C) (0W at 120°C)
  • Actual Temperature Coefficient < 20 ppm/°C
  • Working temperature: -40...+70°C
  • Storage temperature: -40...+100°C

Name:
  • MK4D Contactless Magnetostrictive Displacement Transducers
Features:
  • Features
  • • 50 to 4000 mm stroke.
  • • Contactless transducer for longer lifetime.
  • • Digital output RS422 start/stop or PWM
  • • Multi-cursors management (min distance: 75mm)
  • • Repetibility < 0,01mm..
  • • Resistance to vibrations
  • • Grade of protection IP67
  • • Overvoltage and overcurrent protection
Specifications:
  • Measurement taken: linear position and speed
  • Vibrations: 10...2000Hz, amax. = 12 g
  • Shock: 100g, 11ms.
  • Resolution < 10μm
  • Displacement speed < 10m/s
  • Maximum power ripple = 1Vpp
  • Max acceleration < 100 m/s2 shift
  • Rated power supply = 24Vdc ± 20%
  • Resolution: infinite
  • Actual Temperature Coefficient < 20ppm F.S./°C
  • Electrical isolation = 500V
  • Working temperature: -30...+75°C
  • Storage temperature:
  • -40...+100°C

 

Name:

·         MK4A Contactless Magnetostrictive Displacement Transducers

Features:

·         Features

·         • 50 to 4000 mm stroke.

·         • Contactless transducer for longer lifetime.

·         • Possibility of one or two cursors simultaneously

·         • Independent linearity ± 0,02%

·         • Repetibility < 0,01mm..

·         • Quick plug-in through stainless steel connectors

·         • Sliding or floating magnetic cursor

·         • Direct analog output for displacement and speed

·         • Cursor position: single or double (min. distance 75mm)

·         • Resistance to vibrations

·         • Grade of protection IP67

·         • Overvoltage and overcurrent protection

Specifications:

·         Measurement taken: linear position and speed

·         Vibrations: 10...2000Hz, amax. = 12 g

·         Shock: 100g, 11ms.

·         Speed measurement range: 0~0.1/0~10m/s

·         Displacement speed < 10m/s

·         Maximum power ripple = 1Vpp

·         Max acceleration < 100 m/s2 shift

·         Rated power supply = 24Vdc ± 20%

·         Resolution: infinite

·         Actual Temperature Coefficient < 0.005% F.S./°C

·         Electrical isolation = 500V

·         Working temperature: -30...+75°C

Name:
  • TPHA pressure transmitters
Features:
  • • Ranges: from 0...1500 to 0...5000 bar / 0...20000 to 0...70000 psi
  • • Protection rating: IP65
  • • Entirely in stainless steel
  • • Wetted parts AISI 304 and 15-5PH
  • • Accuracy up to ±0.3%FSO
Specifications:
  • Measurement range from 0...10 to 0...1000 bar / 0...150 to 0...15000 psi
  • Overpressure = 3 x FS
  • Supply voltage = 10~30Vdc
  • Max absorption on power supply: 20~40mA
  • Supply sensitivity < 0.0015%FSO/V
  • Insulation resistance = >1000 MOhm
  • Mechanical shock = 100g/1ms
  • Noise output < 0.05%FSO
  • Compensated temperature range = 0...+70°C
  • Operating temperature range = -30...+85°C
  • Thermal drift over compensated range < 0.02% FSO/°C
  • Response time (0~90%FSO): 1~8msec
  • Protection degree: IP65

Name:
  • TPFA pressure transmitters
Features:
  • • Ranges: from 0...10 to 0...1000 bar / 0...150 to 0...15000 psi
  • • Output signal 4...20mA 2-wires / 0.1...5.1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...10Vdc
  • • Protection rating: IP65
  • • Entirely in stainless steel
  • • Wetted parts AISI 430F and 17-4PH
  • • Accuracy up to ±0.3%FSO
Specifications:
  • Measurement range from 0...10 to 0...1000 bar / 0...150 to 0...15000 psi
  • Overpressure = 3 x FS
  • Supply voltage = 10~30Vdc
  • Max absorption on power supply: 20~40mA
  • Supply sensitivity < 0.0015%FSO/V
  • Insulation resistance = >1000 MOhm
  • Mechanical shock = 100g/1ms
  • Calibration signal = 80%FS
  • Vibrations = 20g max at15-2000Hz
  • Compensated temperature range = 0...+70°C
  • Operating temperature range = -30...+85°C
  • Thermal drift over compensated range < 0.02% FSO/°C
  • Response time (0~90%FSO): 1~4msec
  • Protection degree: IP65

Name:
  • TPA pressure transmitters
Features:
  • • Ranges: from 0...10 to 0...1000 bar / 0...150 to 0...15000 psi
  • • Output signal 4...20mA 2-wires / 0.1...5.1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...10Vdc
  • • Protection rating: IP65
  • • Wetted parts AISI 304 and 17-4PH
  • • Accuracy up to ±0.15%FSO
Specifications:
  • Measurement range from 0...10 to 0...1000 bar / 0...150 to 0...15000 psi
  • Overpressure = 3 x FS
  • Supply voltage = 10~30Vdc
  • Supply sensitivity < 0.0015%FSO/V
  • Output noise < 0.05% FSO
  • Insulation resistance = >1000 MOhm
  • Volt. Spike protection > 2KV
  • Mechanical shock = 100g/1ms
  • Vibrations = 20g max at 15-2000Hz
  • Compensated temperature range = 0...+75°C
  • Protection degree: IP65
  • Operating temperature range = -30...+85°C
  • Thermal drift over compensated range < 0.02% FSO/°C
  • Response time (0~90%FSO) : 1~4msec

Name:
  • TK pressure transmitters
Features:
  • • Ranges: from 0...3 to 0...500 bar and ranges from -1...+1 to -1...+10 bar
  • • Output signal 4...20mA 2-wires / 0.1...5.1Vdc / 0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...10Vdc
  • • Protection rating: IP65/IP67
  • • Wetted parts AISI 430F and 17-4PH
  • • Available with a variety of process connections, both standard and custom
Specifications:
  • Accuracy up to ±0.25%FSO
  • Resolution: Infinite
  • Measurement range = 0..3 to 0..500 / -1..+1 to -1..+10 bar
  • Overpressure = 2 x FS
  • Supply voltage = 10~30Vdc
  • Supply sensitivity < 0.0015%FSO/V
  • Output noise < 0.05% FSO
  • Insulation resistance = >1000 MOhm
  • Volt. Spike protection > 2KV
  • Mechanical shock = 100g/1ms
  • Vibrations = 20g max at 15-2000Hz
  • Compensated temperature range = -10...+85°C
  • Operating temperature range = -40...+105°C
  • Thermal effect over compensated range < 0.012% FSO/°C
  • Response time (0~90%FSO) < 1msec
  • Start-up time < 500msec
  • Protection degree: IP65/66/67

Name:
Features:
  • 1. Strain-gauge, potentiometer and d.c. inputs 2. PI or PID control 3. Fast control response time 4. Auto/Man station 5. Automatic calibration checking for strain-gauge 6 -wires 6. Custom linearization with 32 steps available 7. Analog retransmission output 8. Configurable alarms 9. Peak, valley, peah-to-peak memory 10. Serial line: optoisolated 4-wires Protocol GEFRAN CENCAL or MODBUS
Specifications:
  • Microprocessor controller in 96x96 mm format (1/4 DIN).
  • Manufactured using SMT, it provides an extremely complete operator interface and IP54 faceplate protection (IP65 with protective cover).
  • The faceplate has a membrane keypad with 6 keys and three 4-digit LED displays for the process variable, setpoint and alphanumeric description of the parameters displayed.
  • There are also two bargraphs for the deviation between the process variable and the setpoint and the output power and LED's to indicate the alarm states and control states.
  • The model 2301 is designed for the acquisition of signals that have a high speed of variation.
  • The input type is selected using a combination of jumpers and keyboard settings and can be a standard linear signal (also with custom linearisation), or the output from a pressure probe, load cell or potentiometer.

Name:
  • 40TB Temperature & Pressure Double Indicantors / Alarm units
Features:
1. Inputs configurable from faceplate. 2. Easy strain-gauge calibration with sensitivity auto-ranging. 3. Control of sensor power supply (input 1). 4. Selectable code protection. 5. Possibility to configure the unit. 6. Power supply for transmitters. 7. Easy to configure . Custom linearization available. 8. Engineering units of the most common physical quantities available either on display or on labels. 9. Acquisition and alarm programmable from 15 up to 120 msec. with resolution from 16000 to 4000 divisions 10. Retransmission of variable values 11. 3 alarms completely configurable from faceplate. 12. 4-wire, configurable serial line. Protocol: GEFRAN CENCAL or MODBUS

Name:
  • 40B96 Pressure / Position Indicator / Alarm unit
Features:
  • 1. Strain-gauge or potentiometer input - configurable by faceplate
  • 2. Sensor supply check
  • 3. Easy to calibrate with sensitivity auto-ranging
  • 4. Protected by a personal code
  • 5. Configurable by serial link
  • 6. Internal linearisation for engineering units
  • 7. Labels provided for the more common physical units
  • 8. Sampling time and trip intervention programmable between 15 and  120msec with resolution between 2000 and 8000 steps
  • 9. Retransmission of the measured variable signal 10. 3 trip points, completely configurable from the faceplate
Specifications:
  • PROFILE
  • Microprocessor based indicator in both 48x48 (1/16 DIN) and 96x48 (1/8 DIN) formats manufactured with SMT.
  • The instruments have a lexan membrane faceplate (guaranteed to IP65) which has 3 keys, a 3 digit display for the 48x48 format or a 3 / 4 digit display for the 96x48 format, and 3 indicating LED's for the output statuses.
  • The input signal can be selected from a wide range of sensors:
  • )W• Potentiometer (minimum 100
  • • Load cell with sensitivity autoranging between 1,5 and 3,3mV/V
  • • Strain-gauge pressure sensor
  • The selection is made using the faceplate keys.
  • A digital input (24Vdc/4mA) is available for resetting, hold, flash, peak handling or releasing latch.
  • The instruments have a maximum of 3 outputs that can be mechanical relays (5A/250V) or logic outputs (0 to 11Vdc).
  • ) is available for retransmitting theWOne output of 4 to 20mA (max. 150 measured input signal.
  • The retransmission output, the digital input and the third output are alternative in the 48x48 format, all these options are available contemporaneously in the 96x48 format.
  • Finally, a triac can be fitted (as an alternative to the other two relay outputs) to drive resistive loads up to a maximum of 2,5A at 220V.
  • The programming of the instrument is made easy by grouping the parameters in function blocks (CFG for the alarm hysteresis, Inp for the inputs, Out for the outputs...) and by a simplified data entry menu.
  • The configuration can be simplified even further using the PC programming kit made up of a connection cable and a menu guide program that runs under Windows (see data sheet cod. 80021).
  • A configurable personal software protection code (password protection) can be used to restrict the levels of editing and displaying the configuration parameters.

Name:
  • 40B48 Pressure / Position Indicator / Alarm unit
Features:
  • 1. Strain-gauge or potentiometer input - configurable by faceplate
  • 2. Sensor supply check
  • 3. Easy to calibrate with sensitivity auto-ranging
  • 4. Protected by a personal code
  • 5. Configurable by serial link
  • 6. Internal linearisation for engineering units
  • 7. Labels provided for the more common physical units
  • 8. Sampling time and trip intervention programmable between 15 and 120msec with resolution between 2000 and 8000 steps
  • 9. Retransmission of the measured variable signal 10. 3 trip points, completely configurable from the faceplate
Specifications:
  • PROFILE
  • Microprocessor based indicator in both 48x48 (1/16 DIN) and 96x48 (1/8 DIN) formats manufactured with SMT.
  • The instruments have a lexan membrane faceplate (guaranteed to IP65) whichhas 3 keys, a 3 digit display for the 48x48 format or a 3 / 4 digit display for the 96x48 format, and 3 indicating LED's for the output statuses.
  • The input signal can be selected from a wide range of sensors:
  • • Potentiometer (minimum 100
  • • Load cell with sensitivity autoranging between 1,5 and 3,3mV/V
  • • Strain-gauge pressure sensor
  • The selection is made using the faceplate keys.
  • A digital input (24Vdc/4mA) is available for resetting, hold, flash, peak handling or releasing latch.
  • The instruments have a maximum of 3 outputs that can be mechanical relays (5A/250V) or logic outputs (0 to 11Vdc).
  • ) is available for retransmitting theWOne output of 4 to 20mA (max. 150 measured input signal.
  • The retransmission output, the digital input and the third output are alternative in the 48x48 format, all these options are available contemporaneously in the 96x48 format.
  • Finally, a triac can be fitted (as an alternative to the other two relay outputs) to drive resistive loads up to a maximum of 2,5A at 220V.
  • The programming of the instrument is made easy by grouping the parameters in function blocks (CFG for the alarm hysteresis, Inp for the inputs, Out for the outputs...) and by a simplified data entry menu.
  • The configuration can be simplified even further using the PC programming kit made up of a connection cable and a menu guide program that runs under Windows (see data sheet cod. 80021).
  • A configurable personal software protection code (password protection) can be used to restrict the levels of editing and displaying the configuration parameters.

Name:
  • CB Load Cells
Features:
  • 1. Range of measurement: from 20 to 200 Kg
  • 2. Accuracy class: C (OIML IR60)
  • 3. All stainless steel construction
  • 4. Corrosion resistant
  • 5. Grade of protection: IP67 (DIN 40050)
Order Code:
  • CB-1-2-3
  • 1:Measurement range (kg)
       K2D----0-20
       K5D----0-50
       K1C----0-100
       K2C----0-200
  • 2:Accuracy class oiml
       C1----C1-1000 divisions
       C2----C2-2000 divisions
       C3----C3-3000 divisions
  • 3:Customer requested

Name:
  • TC
Features:
  • 1. Range of measurement: from100 to 20.000 Kg
  • 2. Accuracy class: 0,2%
  • 3. All stainless steel construction
  • 4. Corrosion resistant
  • 5. Internally generated calibration signal
  • 6. Grade of protection: IP67 (DIN 40050)
Order Code:
  • TC-1-2-3-4
  • 1:Measurement range (KG)
       K1C----0-100
       K2C----0-200
       K3.5C----0-350
       K5C----0-500
       K7.5C----0-750
       K1M----0-1000
       K2M----0-2000
       K3.5M----0-3500
       K5M----0-5000
       K7M----0-7000
       K10M----0-10000
       K20M----0-20000
  • 2:Electric connections
       F----6*0.25--5m shielded cable
       C----VPT02A10-6PT2 connector
  • 3:Sensitivity
       S----2mV/V
       R----3mV/V(500-5000kg)
  • 4:Customer requested

Name:
  • TR Load Cells
Features:
  • 1. Range of measurement: from 100 N to 1kN
  • 2. Accuracy class: 0,5%
  • 3. Corrosion resistant
  • 4. Internally generated calibration signal
  • 5. Orientation of the axis of maximum sensitivity for 35?independently from the position of the fixing holes
  • 6. Grade of protection: IP65 (DIN 40050)
  • 7. Integrated protection against overloads
Order Code:
  • TR-1-2-3-4
  • 1:Measurement range(N)
       N1C----0-100
       N2C----0-200
       N3.5C----0-350
       N5C----0-500
       N7.5C----0-750
       N1M----0-1000
  • 2:External diameter
       C35----35mm bearing
       C40----40mm bearing
       P30----30mm shaft spindle
  • 3:Flange
       1----FLA705
       2----FLA711
       3----FLA715

4:Customer requested

Name:
  • SH Load Cells
Features:
  • 1. Range of measurement: from 500 to 10.000 Kg
  • 2. Accuracy class: D1 (OIML IR60)
  • 3. All stainless steel construction
  • 4. Corrosion resistant
  • 5. Insensitive to lateral loads
  • 6. Grade of protection: IP66 (DIN 40050)
Order Code:
  • SH-1-2
  • 1:Measurement range (kg)
       K5C----0-500
       K1M----0-1000
       K2M----0-2000
       K5M----0-5000
       K7.5M----0-7500
       K10M----0-10000

2:Customer requested

Name:
  • CT Load Cells
Features:
  • 1. Range of measurement: from 100 to 3000 kN
  • 2. Accuracy class: 0,5%
  • 3. Elastic element in stainless steel
  • 4. Corrosion resistant
  • 5. Internally generated calibration signal
  • 6. Grade of protection: IP65 (DIN 40050)
Order Code:
  • CT-1-2-3
  • 1:Model
       A
       B
       C
       D
2:Measurement range
   KN1C----0-100(CTA)
   KN2C----0-200(CTA)(CTB)
   KN3C----0-300(CTA)(CTB)
   KN5C----0-500(CTC)(CTB)
   KN7.5C----0-750(CTC)(CTB)
   KN1M----0-1000(CTC)
   KN1.5M----0-1500(CTC)(CTD)
   KN2M----0-2000(CTD)
   KN2.5M----0-2500(CTD)
   KN3M----0-3000(CTD)
3:Customer requested

Name:
  • CM Load Cells
Features:
  • 1. Range of measurement: from 100 to 50.000 Kg
  • 2. Accuracy class: 0,1%
  • 3. All stainless steel construction
  • 4. Corrosion resistant
  • 5. Internally generated calibration signal
  • 6. Grade of protection: IP67 (DIN 40050)
Order Code:
  • CM-1-2-3-4
  • 1:Measurement range (KG)
       K1C----0-100
       K2C----0-200
       K3.5C----0-350
       K5C----0-500
       K7.5C----0-750
       K1M----0-1000
       K2M----0-2000
       K3.5M----0-3500
       K5M----0-5000
       K7M----0-7000
       K10M----0-10000
       K20M----0-20000
       K30M----0-30000
       K50M----0-50000
  • 2:Electric connections
       F----6*0.25--5m shielded cable
       C----VPT02A10-6PT2 connector
  • 3:Sensitivity
       S----2mV/V
       R----3mV/V(500-5000kg)
  • 4:Customer requested

Name:

  • Thermocouples

Order Code:

  • VE-1-2-3-4-5-6-7-8
  • 1:Model number
       10
       11
       12
  • 2:Tube dia
       N----without     
       A----1.6
       B----3.2
       C----5
       D----6.35
       E----8
       F----9.5
       G----12.7
       H----15
       I----22
       J----12.5
       K----4
       L----2.3
       other
  • 3:Tube length
       000----0mm
       050----50mm
       100----100mm
       150----150mm
       other
  • 4:Fitting screw
       N----without
       A----1/4”-20UNC
       B----5/16”-24UNF
       C----PT1/8”
       D---- PT1/4”
       E---- PT3/8”
       F---- PT1/2”
       G---- PT3/4”
       H---- PF1/8”
       I---- PF1/4”
  •    J---- PF3/8”
       K---- PF1/2”
       L---- PF3/4”
       M----M6
       P----M8
       S----M10
       Q----1/4”-stainless steel
       R----3/8”
  • 5:Lead wire length
       00----None
       01----0.1m
       05----0.5m
       10----1m
       15----1.5m
       20----2m
       1T----10m
       A1----11m
       A2----12m
       A3----13m
       2T----20m
       B1----21m
  • 6:Element
       N----None
       K----K(CA)
       J----J(IC)
       P----Pt(100ohm)
       R----R(Pt-13%)
       S----S(Pt-10%)
       T----T
  • 7:Wire material
       N----None
       stainless net coat
       A----0.65/1
       B----0.32/4
       C----0.65/1(L)
       fiberglass coat
       D----0.65/1
       E----0.65/4
       F----0.65/7
       G----0.32/4
       H----0.32/7
       PVC coat
       I----0.65/1

  •    J----0.32/4
       tafolon coat
       K----0.65/1
       L----0.32/4
  • 8:Isolation
       N----without
       Y----isolated

Name:
  • TR100 Signal Transmitter
Features:
  • 1. 24VDC power supply.
  • 2. 1KΩ~100 KΩ displacement transducer(potentiometer)input.
  • 3. 0~10V analog output.
  • 4. 0/4~20mA analog output.
  • 5. Hotswapable terminals.
  • 6. Mounting by 35mm DIN rail.
  • 7. Input shortcut protection.
  • 8. Driving by low voltage.
Specifications:
  • 1. Power supply:24VDC±10%
  • 2. Dissipation:<2.5 W
  • 3. Output:3 terminal linear 1KΩ~100KΩ potentiometer sensors
  • 4. Input:0-10V(non-linearity:<0.02%FS),0/4~20mA(non-linearity:<0.03%FS)
  • 5. Accuracy:±0.1%FS
  • 6. Working temperature:0~50℃
  • 7. Storage temperature:-20~70℃
  • 8. Humidity:0-90%RH non-condensing
  • 9. Weight:80g(including connector)
  • 10. Mounting :DIN-35mm rail

1.人机操作面板(HMI)部分:
(1) 处理器(CPU Processor):2组高速32位元的处理器。
(2) 显示单元:5.7英吋TFT彩色液晶示器(320像素×240像素)。
(3) 操作按键數:最多64个机械键及最多64个按键指示灯。
(4) 提供断电时资料备份记忆功能。
(5) 多样选购用功能:USB埠,SD/MMC卡槽,Ethernet网路,RS-485通讯等等。
2.远端控制模组(Remote I/O)部份:
(1) 數位输入(D/I):DC+24V,标准有16点,主板可扩充至24点或外加扩充模组至32点。
(2) 數位输出(D/O):DC+24V、2A/每点,标准有16点,驱动电流最高10A,主板可扩充至24点或加外部扩充模组至32点。
(3) 比例阀控制输出(PWM):1A/每轴,标准2轴,可扩充至3轴。
(4) 類比输入(A/I):12位元,4通道。
(5) 温度控制:4段(可控制)+1段(油温感测),可扩充至7段(可控制)+1段(油温感测)Auto tuning, PID, ℃/℉切换…等等。
(6) RPM转速(pulse-train)输入: 1通道(选配)。
3.电源需求(Power requirement)
(1) 系统电源:DC+12V, 2.9A
(2) 外部装置驱动电源:建议DC+24V,350W(供外部装置驱动用)
建议DC+36V,100W(供比例阀控制输出用)


MOBILE:13816144313 Copyright: TheTrademark of ARICO Technology Co.Ltd
Products listed in this website, the company has the ultimate power of interpretation